RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   Choosing a Blow-Off Valve... (https://www.rx7club.com/single-turbo-rx-7s-23/choosing-blow-off-valve-1017612/)

red87tll 12-20-12 03:07 PM

Tial Q 50mm. As far as I'm concerned, it's the only one out there... well worth the money.

CrispyRX7 12-20-12 04:09 PM

TiAL 50mm.

Regards,
Crispy

dabigesii 12-20-12 08:30 PM

I have a Turbo XS RFL...never has given me problems...although it is really f@&king loud...just a loud psssh sound, no muss, no fuss

boostdtalon 12-20-12 09:12 PM

I have ran a Synapse BOV or DV on three different cars now. I've always been pleased with its performance. Will always make them my first choice for that particular job.

notveryhappyjack 12-20-12 10:51 PM

i use a blitz one that makes a silly chirp sound, like a group B ralley car!

red87tll 12-21-12 03:03 PM

Dont buy a performance part if it doesnt perform. Pretty sure every hks bov leaks and the same with RFLs. I've literally thrown away severals of each. Greddy type s/rs are ok at like 10psi most of the time, but they will leak with higher pressures. Tial. Never leaks, very well engineered and very reliable. Words of experience.

thewird 12-21-12 03:29 PM


Originally Posted by red87tll (Post 11323377)
Dont buy a performance part if it doesnt perform. Pretty sure every hks bov leaks and the same with RFLs. I've literally thrown away severals of each. Greddy type s/rs are ok at like 10psi most of the time, but they will leak with higher pressures. Tial. Never leaks, very well engineered and very reliable. Words of experience.

Add synapse BOV's to that no leak list. I don't remember my greddy rs leaking but then again I never tested it like most leaking. The Turbosmart ones also leak.

thewird

The_Fox 12-22-12 02:50 PM


Originally Posted by red87tll (Post 11323377)
Dont buy a performance part if it doesnt perform. Pretty sure every hks bov leaks and the same with RFLs. I've literally thrown away severals of each. Greddy type s/rs are ok at like 10psi most of the time, but they will leak with higher pressures. Tial. Never leaks, very well engineered and very reliable. Words of experience.

You sure those weren't knock-off fleabay HKS bov's. I have never had an HKS that I bought straight from HKS leak. The knock-offs on the other hand... they sucked.

mymmeryloss 12-22-12 04:33 PM

Cant go wrong with TiAL

fcrotory 12-22-12 04:44 PM

I use a Blitz dual drive. Never had problems and doesnt sound stupid like most bov's...

mymmeryloss 12-23-12 09:53 AM

Since when do bov's sound stupid?

thewird 12-23-12 09:54 AM


Originally Posted by mymmeryloss (Post 11324570)
Since when do bov's sound stupid?

Since the ricers started using them and SSQV sounds popped up.

thewird

fcrotory 12-23-12 01:49 PM

Who like that annoying bird chirp crap anyways... Sounds ridiculous.

Double_J 12-23-12 07:36 PM

Turbosmart was a pile of shit. I couldn't stop the damn thing from leaking.

tuscanidream 12-27-12 06:00 AM


Originally Posted by JBF (Post 11321009)
I actually changed my mind and have sold the Greddy BOV.

I will be purchasing a Synapse BOV as its replacement.

:lol:

Why did you sell the greddy?

If you were pinched for cash, you should have gone with the oem lanevo one I suggested. It works, and is cheaper than the greddy rs. Unless your one for buying shiny parts because shiny.?!

503rx7 01-21-13 08:39 PM

I heard tial is nice and loud

JBF 01-21-13 09:11 PM


Originally Posted by tuscanidream (Post 11327250)
:lol:

Why did you sell the greddy?

If you were pinched for cash, you should have gone with the oem evo one I suggested. It works, and is cheaper than the greddy rs. Unless you're* one for buying shiny parts because shiny.?!


I sold the Greddy because I didn't want it. I read about too many issues with them. I would have gone with an RZ but I came across a BNIB Synapse for $150 from a friend.

I've seen ZERO complaints about Synapse's products and I could care less about what a BOV looks like.

I am not pinched for cash by any means. I do value people's opinions but your TWO assumptions about me were both incorrect and a little insulting.

I went ahead and corrected some of your spelling as well... :icon_tup:


All times are GMT -5. The time now is 11:01 PM.


© 2024 MH Sub I, LLC dba Internet Brands