Best exhaust silencer?
 

My exhaust now exits in front of my passenger door. It's too loud for street driving so I need a 3.5 inch silencer. Anyone know what the best exhaust silencer is?

just an inline magnaflow SS muffler would do wonders.. its gunna be hard to fit much in before your front fender

I'm looking for just a insert. Something I can remove when on the dyno or at the track.

How about a super trapp?

i dont think those scilence much.... unless thats the point

POST PICS!!! please.

Dude, I said a insert. I don't want some donky dick looking super trap hanging off my car.

^pull an insert off another car and fab one...

or try this
nm...wasn't a silencer

I'll try and get something up today.......I would get a soundclip up but it would be worthless, it would just be distorted.

Yeah, I might try to fab one, maybe an insert that brings the opening down to an inch. Not sure if it will even run with an opening that small.

yea then you do a WOT pull and it fires that silencer out at mach 2 right into the side of another car.

you could always weld in 2 vband clamps in between your DP end and the pipe that sticks out the passanger side door. Then you could just quickly go from a 3.5 round magnaflow for the street, right back to a straight pipe for the track. Alot of my Dad's friends used t do that back in the day for quick removal of the muffler for track used. Problem is you have to have 2 vbands and 6 flanges. It cost a little more that most but its really effective.

apexi makes an electronically (or manually if you prefer) exhaust flapper, you could put it on the end of your pipe and control your note/ db level from inside the car.

running manual they have a thing that resembles a choke line that runs into the cab.

how quiet can a straight DP be??? even with an 1" opening...

COME AWN LUPE...video or sound clip...at least a freakin' picture!!

how much room do you have....we need pics.

I'l get some pics this week. I didn't have time yesterday.

There is plenty of room. I can go over 4 inch speed bumps without scraping etc. etc. etc......

i forget who makes them, but there are inserts for headers you can get that just slip in.

check summit and you might find something useful.

Can we please see a picture of this exhuast, I'm really curious!

http://store.summitracing.com/partde...5&autoview=sku

A lot of duhmestic guys use these basic mesh cone inserts to quiet things down.

Yeah, DR-Autosports is getting me one :) :inlove:

I'll try and get pics on tuesday, if not then I'll have pics this coming weekend when Steve Kan comes to tune my car.

It looks about the same as this http://www.nhrasportcompact.com/2005...s/photo103.JPG

that's what i was talkin' about :)

I ran a y-pipe(exhaust cutout is what the old timers and e-bay goes by)on my 626. Then I just piped my regular exhaust out and when at the track take off the cap that was on the fender exit pipe. So around town I ran full exhaust. Get to the track and unbolt the 3 10mm screws and instant noise and spoolup. gotta love that. good luck and post some pics when done.