BB Turbo Assembly
2 Attachment(s)
So as most of you know garrett doesnt sell shit for their bb turbos.
I have a fresh p trim chra but im missing 1 piece. From what i can tell i need the oil slinger aka the collar in the backplate. Maybe someone has a bad turbo or maybe one that is apart. Bryan |
Even a picture of what im looking for. Someone has to have one that is damaged that they can take the compressor wheel and back plate off of.
I called a few shops with little feedback so i need help from the community. Id really hate to buy a new turbo just for parts. |
Really??
Nobody has a reply i know there are guys on here that build turbos. I guess its not worth messing with since it wouldnt bring anyone any cash?? |
Try Performance Techniques www.turbocharged.com. He has many parts in stock and knows what he is talking about. He sent my parts out the same day.
|
yeah that guy is awsome but he cant get that part.
Hes even sent me free parts before because i always by from him. |
I have a gt35/40r that shit the bed, mind posting a pic of what exactly you need
|
Try Elliot at turblown.
|
thats the thing garrettt has made it very difficult to even get a diagram of a bb turbo. its the peice that goes in the center of the backplate above what would be the thrust plate if it wasnt ball bearing.
I would be so greatful if you could take the compressor and back plate off of your 35/40r and take a picture. does yours have the 4 bolts holding the backplate on or a snap ring? |
2 Attachment(s)
i believe this is the part you are looking for, front oil seal for a BB T3 turbo
https://www.rx7club.com/attachment.p...1&d=1331643168 compare to a front oil seal for a journal bearing turbo.. the BB part is taller since there is no thrust bearing. I can sell you this one for $40, or you may be able to get by with a journal bearing seal, and just find the right spacer to put between the front oil seal and front bearing race |
Show me a picture of your turbo and where the missing piece goes, or is it the piece illustrated above?
|
I believe that is it.Yes it is taller than if it were for a journal bearing
|
All times are GMT -5. The time now is 05:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands