Anyone Using E-Boost Street with a 4 Port Solenoid?
With the stock 3 port solenoid, my 12 psi boost settings and response are good and like the manual states.
But at 18 psi, I have to set Gate Pressure down to 1 psi to limit spiking to about +.5 psi. Any higher spiking gets worse. This hurts spool-up. If using a 4 port, how is your spoolup? |
All times are GMT -5. The time now is 11:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands