14mm banjo to AN, is there one smaller than -6AN?
 

I know AtpTurbo makes a 14mm to 1/4." Does anybody know of a banjo fitting with a smaller outlet?

batinc.com
call them up they probably can get it but it may take a couple of weeks. Atleast that is the case with the one I just ordered which is 18mm banjo --> -10 AN line.

Bob

The address doesn't work:(

:doh:! stupid me it's .net
http://batinc.net/main.htm
or call em at (941) 355-0005

Bob

out of curiousity ....what is this for anyway?

Bob, thanks. I just called them and they have a 14mm bolt with a -4an fitting.

I am trying to put together an oil feed line for the turbo. I know I can connect a line to fitting at the end of the stock hardline, but I'm not crazy about the 'loop' of hose that is necessary to mate the line up with the angle of the input on the turbo.

Here is what I'm planning on doing instead:
14mm x1.5 to -4AN female
-4AN to -3AN
-3AN hose (with ends)
-3 AN to 1/8" NPT male

Thanks again for the contact.

glad i could help