hello guys, i need to tune my hks fcon somewhere in HOUSTON area ...if you know how to tune one and own a fd and is willing to do it for me .....let me know, any shops thats for fds ... if there is a charge , let me know how much..ect ...thanks guys

 

there are a couple of guys in the club that can do it... no shops in town that specialize in FD performance.... your better off taking it to Dallas and letting RP or Gotham handle it.

 

where can i contact the guys that are in the club... im located in port arthur texas ..hopefully i can find someone in houston that can tune it and would actually save me some time from going to dallas ...

my mods

apexi intake
greddy bov
greddy boost controller
custom 3in dp
apexi exhaust
2mm apex seal
pulley kit
act clutch
ported motor
elminated most vacums
tru twins
ngk wires
ngk plugs
hks fcon
greddy boost and egt
hks turbo timer

i dont know if im forgettin anything but thats mostly it ....im surely need the fcon tuned so let me know

 

94 mazda rx7 R1

 

Is it old school HKS PFC fcon

 

yea its the old scoo one ...hks pfc fcon

 

If you have the Fcon Pro. You'll need to contact the HKS pro dealer to get it tune since they're the only ones that has the necessary hardware/software to tune them. Jotech and SGP are the only two pro dealer in Texas. You might want to contact SGP since they're located in Houston.

 

It's pretty easy to tune your self, it's the same thing i'm using. First open up the computer and there's a ROM chip with some letter's and numbers on it. Write that down and call HKS Tech's and tall them what type of acr with what mods, and what ROm chip should you be using. Then go to this web site, and it's drive and tune.

http://www.fd3s.net/fcon_install.html

 

Now those are your power mods...

With living in Texas and all. I would just ditch that HKS, buy a Power FC and pay Pluto to tune it for ya. Might as well get it done by the master himself if you can...