When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Seems like it might be beneficial to have the wing mount to the chassis horizontally through the rear bumper reflector/reverse lighting hole, because then you could just cut a hole in the OEM lights and keep your lightingcompletely functional. Or cut holes through an aftermarket set of resin Concept-7 rear bumper lights / or the Hot Water Lab ones.
When the track wing is not in use, a custom designed tow hook could be bolted through one of the horizontal hole/s in place of the wing mount.
Seems like it might be beneficial to have the wing mount to the chassis horizontally through the rear bumper reflector/reverse lighting hole, because then you could just cut a hole in the OEM lights and keep your lightingcompletely functional. Or cut holes through an aftermarket set of resin Concept-7 rear bumper lights / or the Hot Water Lab ones.
When the track wing is not in use, a custom designed tow hook could be bolted through one of the horizontal hole/s in place of the wing mount.
Thats a very good idea. Website shows out of stock, any updates on this?
Website also lists steel brackets. Wonder why not use aluminum to keep weight down?
