Once again...damn. I can't believe we don't have more people drooling over this kit.
(And I know the front fenders and bumper are from the Burnout kit, which is also a nice kit, just not as good as this one!) |
Originally Posted by silverTRD
BTW...those fenders are waaaaaaaay clean, put me down for those too if they get built. i have cash in hand if that helps. hehe
Sanai sides and rears are not available yet......so pricing has not been yet determined. |
oh well i just want the sanai kit then...hehe they look different to me not painted. lol
so is the sanai front available then? |
What type of wheels are on the Silver Rx7?
|
i see theres finally a couple more people....how many do we need to get it made 5 or something?
im still really wanting this i just really want to go further with my exterior. if 1 or 2 more will get this made i may have to send a deposit. i will just need front and sides |
nevermind i read....i am interested. i have other parts already but i havnt painted anything. if we get enough guys and it doesnt take too long i will probably be in!
im also looking at the version select kit right now, were you guys doing anything with that? i would just rather buy from you because of the prices and i know the stuff is excellent from my own past purchases. |
Nutted...
|
I know we have to be getting close now.
bumpity bump...stay bumped |
Originally Posted by shineautoproject
http://img227.imageshack.us/img227/4...fd3s0907tm.jpg
http://img227.imageshack.us/img227/6...fd3s0924qt.jpg MMmMmM :drool: Just add the carbon side runner/diffuser, and i am in there like swimwear (early 1990's term for these young kids). |
ShineAuto, will the front bumper work with the stock undertray or would i have to purchse a new one? will it fit with the stock rebar? if it doesn't fit nicely, would it just be a matter of trimming so the marker lights can fit?
|
1. Power Hungry $350
2. silverTRD $350 3. Anonymous $350 4.93VRFD_HOUSTON (pending) 5. speedjunkie (pending) 6. NJSTREETRX7 (pending) 7. NuTbAgSaN (interested) 8. RedR1 (inerested) 9. 10. is this list right then? RedR1, NuTbAgSaN, are you guys both "pending" on this one? are the rest of you just waiting to make a deposit until there's a full list? |
Originally Posted by pugg57
1. Power Hungry $350
2. silverTRD $350 3. Anonymous $350 4.93VRFD_HOUSTON (pending) 5. speedjunkie (pending) 6. NJSTREETRX7 (pending) 7. NuTbAgSaN (interested) 8. RedR1 (inerested) 9. 10. is this list right then? RedR1, NuTbAgSaN, are you guys both "pending" on this one? are the rest of you just waiting to make a deposit until there's a full list? |
Originally Posted by pugg57
1. Power Hungry $350
2. silverTRD $350 3. Anonymous $350 4.93VRFD_HOUSTON (pending) 5. speedjunkie (pending) 6. NJSTREETRX7 (pending) 7. NuTbAgSaN (interested) 8. RedR1 (inerested) 9. 10. is this list right then? RedR1, NuTbAgSaN, are you guys both "pending" on this one? are the rest of you just waiting to make a deposit until there's a full list? |
i'm trying to get a few questions answered (from past SAP customers) and ShineAutoProject, then i have to run it past my budget person (aka my wife) and i'll most likely be able to put myself up there as number 9. :bigthumb:
but for now, i'm just gathering info... to make an informed decision. |
I would like to make a deposit for the sides and rear pieces . . . how much money do i need to send shine.
Also, does anyone want to buy some burnout sides and rear from me :) I'll prolly sell them in 2 months. |
Originally Posted by pugg57
i'm trying to get a few questions answered (from past SAP customers) and ShineAutoProject, then i have to run it past my budget person (aka my wife) and i'll most likely be able to put myself up there as number 9. :bigthumb:
but for now, i'm just gathering info... to make an informed decision. |
RedR1, do you have any pictures of the product as it was delivered? how is the fitment? what type of material, flexible at all? where there pock-marks or bubbles in it? will they require work for proper fitment/alignment? what was the gap like around adjacent stock body panels?
|
what up---gett'n stoked here!!! hope we get #10 .........i'm waiting to give deposite, when we have 10 i will send my 350 cash
|
Originally Posted by pugg57
RedR1, do you have any pictures of the product as it was delivered? how is the fitment? what type of material, flexible at all? where there pock-marks or bubbles in it? will they require work for proper fitment/alignment? what was the gap like around adjacent stock body panels?
Here was a test fit of the fender on my FD. There was no engine in the car at the time, hence the humungoid gap from tire to fender. I also had the body guy remove a little more of the inner lip of the fender above the tire so I could run 255 up front and 275 in the rear. Pic was done with my camera phone, sorry for the low quality :( http://i23.photobucket.com/albums/b3...1/29f65ed7.jpg Here is a pic of the fenders laid down on the ground before i threw them in the DD to take to the bodyshop: http://i23.photobucket.com/albums/b3...1/98ebddae.jpg Upon the test fit, i didn't notice any major gaps or anything. Once i go to pick my FD up though, I will get the skinny from my bodywork man and let you know! |
please keep me posted please Chris. any idea when you'll get it back from paint?
|
how bout everyone interested just put down a deposit then we will be really close.
|
If there was a major problem with the fenders........we would handle it :)
|
do you guys still make these fenders, or can you, and give them to use at a gb price because they look so great with the front?
i think that combo would look great with the feed sides i already have! |
Originally Posted by pugg57
please keep me posted please Chris. any idea when you'll get it back from paint?
I should be getting her back next week if all goes well. |
add me to the list!! i'll do it if there's a number 10! :D
|
All times are GMT -5. The time now is 11:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands