Would you make these available for the verts as well?
|
shit I'll buy a set for my FD pls
|
For a racecar I'm less interested in strength as I'd have reinforcement behind the door with my cage. I wouldn't go with carbon but instead a softer FRP that has a modulus of elasticity that will allow for the odd bump or ding to not require repair or worse yet replacement of said door.
Also, since the doors would be two parts bonded together some hardcore people maybe just interested in the outer skin and with mounting points at the front and a semi jam at the rear. I myself wouldn't need mounting points for any window hardware, locks, etc. Most racecars simply retain the unlocking assembly but run a thin piece of aircraft cable to another point at the front of the door so you can just give a downward tug and the door pops open. My vote is (softer) FRP and a just the outer shell with surrounding jams. |
I'm also interested for my timeattack car but shipment to Belgium will be to much I think. Also interested in the rear hatch if you could make it.
|
Very good points Jason. I think you answered most of my questions. The skeleton won't add much weight. Maybe 1-2 lbs on each side :). It helps with providing accurate mounting points.
Vacuumed FRP seems to be ideal , since it will reduce the cost of the item and do the job. You'll be amazed how strong it is. We can also experiment with a flexible formula as well to give it an extra soft touch. However, I've seen both vacuumed FRP and Carbon , although very stiff, be able to withstand the impact of a baseball bat because there is slight flexibility upon impact. It's the strength of the bond between the fabrics and resin that keep is together. If it was handlaid FRP or Carbon, the impact from a baseball bat would shatter it in an instant. Shall we make a list of who might be interested? I would like to do some experiments :). The reason why I ask is because molds/tooling are very expensive to produce and it would be a shame if there wasn't really a market. Prices of the products can always be adjusted , so demand is most important. I feel we can provide very good value. If everything goes well and the demand is strong, I believe we can provide a pair of FRP doors w/skeleton for $700-850. I don't think there are standard FRP doors on the market for that price. The product quality will be significantly better, which adds value as well. Ken |
Originally Posted by KrisD1
(Post 8545179)
I'm also interested for my timeattack car but shipment to Belgium will be to much I think. Also interested in the rear hatch if you could make it.
We would do the hatch if there is demand for a better quality one. There are aftermarket carbon ones already available. However, they are handlaid and might not be stiff enough to keep a GT wing stable. We can make a super strong one, which would be lighter as well. Price will be competitive as long as there is strong demand. Ken |
800$ for a pair
@.@ sign me up pls |
Haven't spoken to Neal yet, but when I will collect my stuff I will speak to him about it. Any idea when the bumper,diffuser and sides will arrive? Want to make my fc as light as possible and I prefer your parts to the other compagnies.
|
Its going by air and has already gone out early last week. It should arrive fairly soon.
|
so are the doors going to be as strong/ crash resistant like the stock doors? i mean i wouldnt want to put these on a car that is dd or driven on the street at all if the risk of getting t boned could mean my life
|
So how much weight would we actually save with these doors, whether they are vacuum infused dry carbon or fiberglass? I think the majority of people who would want these are gonna put them on their street car.
|
Originally Posted by SlideAlliance
(Post 8554214)
Stock doors usually weigh around 100-120lbs. These will more than likely drop around 80lbs if not more
|
count me in on FC doors
|
I could be interested in either FRP or Carbon, would need to see if anyone else in the UK would want them to save on freight and import duties!
|
count me in for a pair for the FC, pm me when you need deposits
|
count me in for FC doors
|
I'm with you Ken. Lets start opening some light doors. I will need a set of these doors when they are ready for my fd3s
|
Let give this some more time and see if there's more interest. Seems like there's more interest for FC doors than FD doors.
|
Ken, let us FC guys know for sure when you'd need deposits.
|
I'd love to see these doors available for the FC and FD. I'd probably buy a set for my FD farther down the line(year maybe) as I plan to make that a track car, but not for my FC.
|
I'm definitely interested in the vacuumed FRP doors just not until I put bars first...but is there anyone else that is interested in the FD hatch? Cuz I'm in for that!
|
Originally Posted by shineautoproject
(Post 8568480)
Let give this some more time and see if there's more interest. Seems like there's more interest for FC doors than FD doors.
not to presume to tell you how to do your job (im personally a huge fan of yall) but could you pick a # that you need? so we could start getting a list together and be done with this one way or another... also may want to through up a post in the race section. |
i'm interested and the price mentioned above is closer to my price range then what i've scene out there.
|
hey whats up Ken its ill take one for my FC,
|
I will take a set of CF doors and a set of FRP for the FC.
|
All times are GMT -5. The time now is 11:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands