FD 4-POINT bolt-in ROLL BAR
We just sent out a few of these. I have 15 in stock right now. There $975 plus shipping and the turnaround time is about a week.
https://i286.photobucket.com/albums/...ps7iuqaovq.jpg |
1 Attachment(s)
This is BY FAR the best cage for the FD3S.
Not a great shot, but here's one from a while ago: Attachment 749850 |
Matt, the back attachments connect to the strut towers, right? And how did you bolt down the fronts? Finally, what is the seat clearance like? Thanks!
|
Originally Posted by justin samberg
(Post 12271574)
We just sent out a few of these. I have 15 in stock right now. There $975 plus shipping and the turnaround time is about a week.
https://i286.photobucket.com/albums/...ps7iuqaovq.jpg |
Installed mine a few weekends back. Fitment is perfect and bolts right in place very snug. I would recommend this cage to any FD owner...https://cimg3.ibsrv.net/gimg/www.rx7...8bfc64e80.jpeghttps://cimg4.ibsrv.net/gimg/www.rx7...9d04f8b86.jpeg https://cimg5.ibsrv.net/gimg/www.rx7...a31165308.jpeg |
Originally Posted by David Hayes
(Post 12271996)
Matt, the back attachments connect to the strut towers, right?
Originally Posted by David Hayes
(Post 12271996)
And how did you bolt down the fronts?
Originally Posted by David Hayes
(Post 12271996)
Finally, what is the seat clearance like? Thanks!
|
It's too bad there isnt a harness mount...
|
Can you confirm what is suppose to come in the hardware kit?
I currently have nothing to attach the cage to the strut tower boxes. The boxes are tapped, but there is no hardware that fits it. |
|
do you have an option for a harness bar
|
You can wrap the Harness around the strut bar.
|
Will this fit with sunroof model (Touring)?
|
We could add a small laser cut bracket with a 9/16" hole. Very few people have requested that. I think its because these are mostly used on the street.
It also fits the sunroof cars. The top of the Hoop is Approximately 4" forward of the rear hatch. |
I know its hard to see but if you look through the window you’ll see the harness wrapped around the strut tower bar. What do you think? Is that too ghetto for you? https://cimg4.ibsrv.net/gimg/www.rx7...232318d15.jpeg |
Originally Posted by justin samberg
(Post 12273581)
We could add a small laser cut bracket with a 9/16" hole. Very few people have requested that. I think its because these are mostly used on the street.
It also fits the sunroof cars. The top of the Hoop is Approximately 4" forward of the rear hatch.
Originally Posted by justin samberg
(Post 12273607)
I know its hard to see but if you look through the window you’ll see the harness wrapped around the strut tower bar. What do you think? Is that too ghetto for you? I think the harness question pertains to something limiting lateral movement of the harness after it's wrapped around the bar. https://cdn3.volusion.com/qnuwm.rpst...s/R-1150-2.jpg |
Originally Posted by justin samberg
(Post 12273607)
I know its hard to see but if you look through the window you’ll see the harness wrapped around the strut tower bar. What do you think? Is that too ghetto for you? https://cimg4.ibsrv.net/gimg/www.rx7...232318d15.jpeg |
Originally Posted by 403rx7
(Post 12273733)
short answer - yes.
Looks like you’ve got a good product. Add a height adjustable harness bar to it and it’ll be great. |
Hey Justin, Can you show a picture of how it is mounted to the rear strut bar area? |
They wont let you on the track with your harness attached to the STB. I saw a guy get meatballed for that.
Originally Posted by Hot Rod Magazine
SHOULDER STRAPS
The purpose of the shoulder straps is to anchor the driver’s torso against the seat. Although brevity is necessary with all the belts, you especially want to keep the shoulder straps as short as possible because they are the longest pieces of the system. Any safety harness will allow a certain percentage of stretch, so the longer the belt, the more overall stretch it will allow. To minimize shoulder-belt length, the belts should mount to a rollcage bar almost directly behind the driver’s seat and approximately level with his or her shoulder blades (or slightly higher). Racing Seat and Harness Installation - Car Racing Safety Tech - Anchor In - Hot Rod Network |
I think the simplest solution is to weld in a piece of 1 1/4" X.120 or larger dom tube. It only needs one 1/2" bung for the drivers harness. Im not really sure of the best way to make that adjustable or if its really necessary. I'm open to new ideas?
|
Hi Justin,
nice to see you offering something on our board. it appears to be your usual really well engineered piece. i may have a need to order your bolt in rollbar for delivery in August. do you anticipate availability? also, i would need a lateral belt bar which i can fab or you can fab. LMK on avail. i run a T56 behind my 2 rotor and your rear diff mount has been onboard since 2012. thanks, Howard |
Hi Howard,
The parts for these are in stock and try and keep one bar that has been assembled in stock at all times. Its good to here that you are still running the stock rear end housing without issue... |
i run a plate type LSD (Mazda) and the Mcleod double disc has a very friendly feather engagement plus no drag racing from a stop so the gears see easy duty.
|
We are working on a harness bar that can be adjusted height wise. I should have something soon..
|
Was just talking about this to a fellow car enthusiast. Good to hear you are working on a solution.
|
All times are GMT -5. The time now is 06:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands