Originally Posted by rx7 SE
(Post 12014957)
Damnit, I hope you don't stop making these. Just purchased a new home and have bigger priorities at the moment but these were one of the last things I planned on putting on my FD once I'm caught back up financially. Keeping my fingers crossed.
|
Just ordered the 50W kit, looking forward to being able to see what's in front of me:awesome:
|
https://www.rx7club.com/3rd-generation-rx-7-1993-2002-parts-99/sakebomb-bi-xenon-hid-head-light-assembly-1093021/
On the bottom of the thread above there is a photo showing spider cracks. To Sake, are you guys aware of this problem where the projector lens cracking? I certainly wouldn't want this to happen to the light I am buying. |
Originally Posted by mightymikee
(Post 12017018)
https://www.rx7club.com/3rd-generation-rx-7-1993-2002-parts-99/sakebomb-bi-xenon-hid-head-light-assembly-1093021/
On the bottom of the thread above there is a photo showing spider cracks. To Sake, are you guys aware of this problem where the projector lens cracking? I certainly wouldn't want this to happen to the light I am buying. |
1 Attachment(s)
FINAL CALL ON HEADLIGHTS!
We're wrapping up this group buy and will begin production shortly. We'll be closing the group buy after the weekend and at that point we can no longer accept orders. We're down to making these roughly once a year at this point... so if you want a set, now is your chance! Attachment 616250 Thanks to everyone that has signed up! Looking forward to getting these built for you guys!! -SBG How to participate/order: We're providing two Payment options, payment in full, or group buy deposit: Option 1: "You can pay the full (discounted) price on our website and receive the full $150 discount SakeBomb Garage FD3S PremiereLine Bi-Xenon HID kit Option 2: Alternatively, you can make a $250 group buy deposit, for a $75 price reduction, with the balance due upon completion of the group buy (February 1st 2016) GROUP BUY DEPOSIT: FD3S PremierLine Bi-Xenon HID Projector Headlights - SakeBomb Garage LLC[/QUOTE] |
bump for any stragglers... we're shutting this thing down shortly so if you want in, please check out ASAP. We can not accept any orders after the GB closes.
-SBG |
What's the turnaround time looking like?
|
Thanks for the heads up today so I went ahead and
Just signed up and paid in full on the web site so please add me to the list. Thanks Steve |
^You won't regret it, any and all FDs I own will absolutely be rocking these lights :bubrub:
|
Originally Posted by RapidCancel
(Post 12019636)
What's the turnaround time looking like?
|
aRGGGHHHH!!!!! I'm a straggler!!
is it too late? Carl |
^^SakeBomb Garage FD3S PremiereLine Bi-Xenon HID kit
Go directly here... we're almost out but there are still a few left. The group buy deposit page is now closed but you can still pay directly for the GB price by clicking the link above. -Heath |
Bought them, they looks really nice!
|
2 Attachment(s)
One left!
We're closing this GB down early as we're literally out of components to build these out of... we've grabbed every last set of components we can. Sorry to close it early everyone, but for those that have signed up and paid, thank you for you support and we will work as efficiently as possible to build/ get these out to you guys! Thanks again, the SBG team! Attachment 616080 Attachment 616081 |
Woo! Can't wait to see clearly at night... :D
|
Originally Posted by SBGarage
(Post 12020117)
Hopefully 3 weeks at this point :nod:
|
Originally Posted by photoresistor
(Post 12020797)
Woo! Can't wait to see clearly at night... :D
|
If you look at the units when they are retracted, they are directly above the oil coolers in a R1.
For non R1 the driver side has this problem. This may be the cause or part of the cracking problem. This was mentioned in one thread. I made aluminum blocking plates for both sides in my R1. They keep the hot exit air from coming up into the housing area. Then the whole area has self adhering woven fiberglass insulation on top of that. This keeps and high heat away from the units. |
Nice advice, gonna check this out when i install them
|
Originally Posted by cewrx7r1
(Post 12021832)
If you look at the units when they are retracted, they are directly above the oil coolers in a R1.
For non R1 the driver side has this problem. This may be the cause or part of the cracking problem. This was mentioned in one thread. I made aluminum blocking plates for both sides in my R1. They keep the hot exit air from coming up into the housing area. Then the whole area has self adhering woven fiberglass insulation on top of that. This keeps and high heat away from the units. What is the ETA on this Sake? |
We've started in on them, and will post pics as we go. Since the group buy tripled in size it's going to take longer than originally anticipated, but we've already got a head start on them. We'll post pictures and updates as we progress, but we're splitting headlights currently and are in the process of shutting down non-essential operations to convert over to headlight making for a few weeks. I'm estimating a few weeks at this point. :)
|
Originally Posted by SBGarage
(Post 12022983)
We've started in on them, and will post pics as we go. Since the group buy tripled in size it's going to take longer than originally anticipated, but we've already got a head start on them. We'll post pictures and updates as we progress, but we're splitting headlights currently and are in the process of shutting down non-essential operations to convert over to headlight making for a few weeks. I'm estimating a few weeks at this point. :)
|
2 Attachment(s)
Originally Posted by mightymikee
(Post 12022716)
Any photos of this contraption u made? Love to copy it.
No picture of installed insulation. Over the metal. |
That's a damn good idea, Dr. Westbrook :D :icon_tup:
|
Originally Posted by SBGarage
(Post 12022983)
We've started in on them, and will post pics as we go. Since the group buy tripled in size it's going to take longer than originally anticipated, but we've already got a head start on them. We'll post pictures and updates as we progress, but we're splitting headlights currently and are in the process of shutting down non-essential operations to convert over to headlight making for a few weeks. I'm estimating a few weeks at this point. :)
|
All times are GMT -5. The time now is 12:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands