RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Rotary Drag Racing (https://www.rx7club.com/rotary-drag-racing-167/)
-   -   T2 Scatter Sheild (https://www.rx7club.com/rotary-drag-racing-167/t2-scatter-sheild-1067075/)

janousekmike 07-06-14 10:54 PM
T2 Scatter Sheild
 
Does anyone now where to get a good scatter sheild, or have made one that fits a T2 they would like to sell?

KNONFS 07-07-14 08:00 AM
Goopy Performance Inc. - Rotor Housing Refurbishing Services

Can't find it on their site, but they make one, pics from their facebook page:

https://www.facebook.com/media/set/?...5768604&type=1

janousekmike 07-07-14 04:46 PM
Looks pretty easy to make does anyone have advise on previous made versions they have done besides being 1/4" thick steel. They look fairly easy to fab.

ArmyOfOne 07-08-14 05:48 PM
Just remember that it will take 3 longer bolts to hold it in place. While it is possible to install while on the car, it is best to install it outside the vehicle.

I found that I needed to cut the little tab on the passenger side of the bell housing.

I assembled it on the car and I had to lower the transmission tail in order to reach and tighten the 3 longer bolts. I love it because it comes apart in 3 parts.

janousekmike 07-10-14 04:41 PM
Originally Posted by ArmyOfOne (Post 11765010)
Just remember that it will take 3 longer bolts to hold it in place. While it is possible to install while on the car, it is best to install it outside the vehicle.

I found that I needed to cut the little tab on the passenger side of the bell housing.

I assembled it on the car and I had to lower the transmission tail in order to reach and tighten the 3 longer bolts. I love it because it comes apart in 3 parts.
I like it thank you for the heads up. Any pictures of it on the car?

janousekmike 07-16-14 06:56 PM
3 Attachment(s)
Originally Posted by ArmyOfOne (Post 11765010)
Just remember that it will take 3 longer bolts to hold it in place. While it is possible to install while on the car, it is best to install it outside the vehicle.

I found that I needed to cut the little tab on the passenger side of the bell housing.

I assembled it on the car and I had to lower the transmission tail in order to reach and tighten the 3 longer bolts. I love it because it comes apart in 3 parts.
I took your advice, here are some pics of the scatter plate I came up with. It also comes apart in 3 pieces.

janousekmike 08-04-14 01:13 AM
3 Attachment(s)
Scatter Sheild completed, I tried to make it impossible for the flywheel to get out:nod:

Bacon 08-04-14 11:04 AM
Great job!

freddyrx3 08-04-14 02:26 PM
Looks great!!

chino_rx3 09-02-14 06:23 AM
Nice , I always wanted to fab one up , Maybe in the near future I will.,


All times are GMT -5. The time now is 04:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands