9.64@145mph fc3s
Hello everyone.
Worlds quickest and fastest fc3s with stock axles trans and rear diff.... 9.64 @ 145mph 13b s5 secondary bridge BW 72mm turbo Microtech efi Stock trans Stock diff Stock axles Video to follow. www.forcefedracing.ca |
Video
|
car has more in it.. congrats
|
ya def not stock drivetrain.....
|
nice work, more fc street style race cars coming out of the woodwork :icon_tup:
|
Originally Posted by rereme
(Post 10011531)
ya def not stock drivetrain.....
Stock trans, driveshaft, axles, and diff. Over 20 low 10 second passes on the drivetrain. 60 ft was 1.60 |
Congrats on your run. How much hp does this car has?
|
Originally Posted by rotormind
(Post 10011610)
Congrats on your run. How much hp does this car has?
The car makes 660 rwhp Dynojet @ 35 psi. Microtech Ltx12 custom direct port Methonal injection Secondary bridge high comp S5 Street et's Act clutch Custom suspension combo Built and tuned by Forcefedracing.ca |
Originally Posted by Rotary_Robb
(Post 10011374)
Hello everyone.
Worlds quickest and fastest fc3s with stock axles trans and rear diff.... 9.64 @ 145mph 13b s5 secondary bridge BW 72mm turbo Microtech efi Stock trans Stock diff Stock axles Video to follow. www.forcefedracing.ca ok is it 9.64 or 9.5 http://i95.photobucket.com/albums/l140/donjmp/965.png |
Originally Posted by timemachines
(Post 10011739)
very nice congrats on the run gd to c other irs fc's out there but
ok is it 9.64 or 9.5 http://i95.photobucket.com/albums/l140/donjmp/965.png 9.654@145.18 |
very nice run but i think the white timemachines rx7 ran 9.64 with all stock drivetrain,,,very nice tho
|
Nice pass!
|
Congrats to both of you, excellent pass.
|
hats off especially running stock parts!
|
Originally Posted by evo killer
(Post 10011779)
very nice run but i think the white timemachines rx7 ran 9.64 with all stock drivetrain,,,very nice tho
But I think he would have confirmed when he posted earlier. Thanks guys. |
Originally Posted by 4sfeedit
(Post 10011845)
Maybe..
But I think he would have confirmed when he posted earlier. Thanks guys. |
Originally Posted by timemachines
(Post 10011912)
well yes 9.64 at 143 just didnt wanna look like an ass since it aint my post,,,but congrats the car sounds like a beast
I did not know.. How would you look like an ass??? If your time was better then it then you deserve to post... But it was with all factory equipment, axles(and bars), diff, trans etc?????? There is more in the car as it needs a 1.50 which it does consistantly, just the track was cold. I had a look at your posted time.... Very impressive. 1.3 60ft on stock axles/stubs?????? |
Originally Posted by 4sfeedit
(Post 10011975)
Congrats!
I did not know.. How would you look like an ass??? If your time was better then it then you deserve to post... But it was with all factory equipment, axles(and bars), diff, trans etc?????? There is more in the car as it needs a 1.50 which it does consistantly, just the track was cold. I had a look at your posted time.... Very impressive. 1.3 60ft on stock axles/stubs?????? |
Whats the weight of the car? nice run man
|
Great video and great times!! Car has at LEAST a couple more tenths in the 1st half...but the last half was FLYIN!!!
|
Great job guys! Whats the car weigh?
|
Originally Posted by ErnieT
(Post 10013249)
Great job guys! Whats the car weigh?
Ernie, The car weighs 2700lbs (race weight) 660rwhp |
^^
Wow, you guys are movin! |
That's sick. Are you guys running straight methanol, or gas + methanol?
|
gas and meth
|
Wow! Congrats!
|
congrats guys !!!! i gave up on factory tranny and rear . "turbo edition" pass time did it for me :lol: keep goin shes got more in it !!!!
|
Originally Posted by tearbo2
(Post 10014314)
congrats guys !!!! i gave up on factory tranny and rear . "turbo edition" pass time did it for me :lol: keep goin shes got more in it !!!!
Pass time is responsible for many misshaps!!! LOL There is for sure one tenth in the 60 ft! And a bit more power if needed. 60ft 1.600, 330 4.217, 1/8 6.337@115.31, 1000ft 8.145, 1/4 9.654@145.18 |
Originally Posted by 4sfeedit
(Post 10014988)
Thanks...
Pass time is responsible for many misshaps!!! LOL There is for sure one tenth in the 60 ft! And a bit more power if needed. 60ft 1.600, 330 4.217, 1/8 6.337@115.31, 1000ft 8.145, 1/4 9.654@145.18 i need to put my 7 on a diet 2830 race weight too damm heavy , but i love my water to air intercooler !!!! i'm still runnin mazda diff , are you runnin factory axles ???? if so MAD PROPS :nod: |
Originally Posted by Rotary_Robb
(Post 10011374)
Hello everyone.
Worlds quickest and fastest fc3s with stock axles trans and rear diff.... 9.64 @ 145mph 13b s5 secondary bridge BW 72mm turbo Microtech efi Stock trans Stock diff Stock axles Video to follow. www.forcefedracing.ca this is why i should read before i post questions:banghead: :lol: |
Hey Marko, is this the same car that put down 800+ whp?
|
Originally Posted by Trots*88TII-AE*
(Post 10015088)
Hey Marko, is this the same car that put down 800+ whp?
660rwhp Just sorted out the suspension and we balanced it. |
Originally Posted by 4sfeedit
(Post 10015126)
Yes it is... We went down on the turbo size to get into the "shift hp range" using the stock trans.
660rwhp Just sorted out the suspension and we balanced it. |
Originally Posted by RXTASY57
(Post 10015155)
Do you shift in to 5th.?
Let the rpm sort the speed out. |
Huge congrats guys, it's nice to see come Canadians representing in the rotary scene. I might have to hit you guys up for some tips! lol
After seeing what this motor is capable of, I'm sure there will be quicker times to come. |
Originally Posted by Trots*88TII-AE*
(Post 10015251)
Huge congrats guys, it's nice to see come Canadians representing in the rotary scene. I might have to hit you guys up for some tips! lol
After seeing what this motor is capable of, I'm sure there will be quicker times to come. We are proud to be Canadian!!!!! Curling World champs!!!! LOL And we race sometimes.... Oh dont forget Ice racing! LOL There is definatley room for improvement! We are definatley going faster and coming out is our 13b FD3s 3/4 chassis/G-force 32inch tire-- Canadian rocket! Soon. |
Originally Posted by 4sfeedit
(Post 10015186)
Not a chance.
Let the rpm sort the speed out. Reason I ask is, I can't seem to get any faster than about 130 MPH in 4th gear |
Originally Posted by RXTASY57
(Post 10015391)
So what RPM are you shifting at?
Reason I ask is, I can't seem to get any faster than about 130 MPH in 4th gear Remember we are at about 650rwhp. |
good times
|
Curling champs? Is that 12oz curls? :)
|
Originally Posted by enzo250
(Post 10016228)
Curling champs? Is that 12oz curls? :)
Dont forget hockey, we are good at that too! |
Originally Posted by 4sfeedit
(Post 10016875)
20oz lol!
Dont forget hockey, we are the best in the world at that too! And it's the 591ml curl! Come on! lol |
Originally Posted by Trots*88TII-AE*
(Post 10017284)
:nod:
And it's the 591ml curl! Come on! lol 5.91 liters are....LOL |
Bitchen run. How high are you reving it?
|
Originally Posted by 1FAASTFD3S
(Post 10017723)
Bitchen run. How high are you reving it?
Tested to 9800 on the dyno in 4th. |
Good job, Robb/Marko!!! Keep beating on it, so much potential here in stock form!
I really wish I could have been there to watch but some things came up about an hr before I was comming out. Marko, you are one of the most dedicated guys in the sport in our area, for sure. I feel privilaged to have you talented guys so close to my house and help me on my car! |
Congrats guys!
|
Excellent time guys, wish I lived closer so I could pick up more tips and tricks from you. But hopefully I will make it back to visit at some point, or hopefully we can catch up when your in town for the grand prix.
|
Thanks for the props guys...
It has been years of enjoying the sport... Now all we have to do is wait for some good weather! LOL!!! |
wao white timemachines on a real stock tranny
|
All times are GMT -5. The time now is 11:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands