Originally Posted by KNONFS
(Post 7594336)
1 - Engine was built at home (PR)
2 - Its not a PP engine |
hehe Hell Yea!! go Sporty!!!!!
Man vid like this makes me wana "dust" off my car and get it finished so Gaby can tune it again. |
VIDEO OF SECOND PASS THAT SAME NIGHT ONBOARD ,:shocking: TOO MUCH POWER :shocking:
http://grs-motorsports.com/noticias/...rtyonboard.wmv |
that its correct its a homemade semi Pport engine on some meth.
|
that its correct its a homemade semi Pport engine on some meth.
|
that is awsome. congrats to everyone involved
|
F*ckin Awesome! This makes me miss my rx-7s. I can't wait to get back in the rotary game. 6-second 2 rotor just made my day.
|
Originally Posted by joeylyrech
(Post 7595171)
that its correct its a homemade semi Pport engine on some meth.
:bsflag: :gotrice: :bss: :gotrice: |
Originally Posted by RR water injection #1
(Post 7595523)
:rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh:
:bsflag: :gotrice: :bss: :gotrice: But the engine assembly and complety tunning is handle by Mr. Skern!!! With the magic of the Microtech |
Originally Posted by Yeyo_pr
(Post 7595873)
Heyy!! Thanks for the parts!!!!!
But the engine assembly and complety tunning is handle by Mr. Skern!!! With the magic of the Microtech The only magic of Microwreck is that we export it, while no one in its country of origin (with any level of inteligence) would waste their time with it. :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: Honestly :) its a bad joke, like comparing an Amiga500 to a modern day PC ;) :lol: :lol: :lol: But hey :dragster: = zero technology in EFI to go fast, just look at top fuel ;) |
6.97 at almost 200 MPH proves you wrong
"origin" rotary cars worth any shit run MicroTech Hater..eat that hehe pac performance mazsport dyson mazfix etc etc etc etc |
LOL
Drag racing is not for the smartest types in the world ONLY the loudest and least talented from what I have seen. :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: I dont see Mazdaspeed winning LeMans 24 hour running microwreak? I dont see ANY decent rotary track cars in ANY series running microwreak? I dont see ANY non rotary cars winning ANY top level championships in ANY country with microwreak? ^^^ Why???? cause they are rubbish at the end of the day, only realy targeted at the hobby types and ammeture racers with little ability & skilz, who know no better, or have very simple basic applications like full throttle 1/4 mile where a carby will do the job. I dont know of any serious playerz who would touch that stuff, not a single one. They are a hobby ghetto level joke in this country, only used by the lowest of the low, where profits and little effort is highest priority on the table. Its prooven you can use a piece of shit (technology and function wise) to do a fast 1/4 mile, that does not mean that piece of shit is gold, let alone gold plated as you hype it up to be :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: Keep it real dude, they are a two bit nobody ECU maker with a very very average product, pretty much the laughing stock of the Australian scene and its only popular amoung simple people both inteligence wise and tallent wise (or ones who are only focused on profit above function!) at the end of the day. You can put a #1 on your advertising if your paranoid about being so average as they are :lol: |
Originally Posted by RR water injection #1
(Post 7595523)
:rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh:
:bsflag: :gotrice: :bss: :gotrice: I've seen this engine, have you? Trust me (and those that have seen it), it is not a PP :) |
Originally Posted by RR water injection #1
(Post 7596149)
You can put a #1 on your advertising if your paranoid about being so average as they are :lol:
:rlaugh: :wallbash: :lol2: :lol: :icon_tup: |
Originally Posted by KNONFS
(Post 7596172)
RR water injection #1
:rlaugh: :wallbash: :lol2: :lol: :icon_tup: Its a paridy on Microtech # 1 :shocking: :shocking: :shocking: :shocking: :shocking: :shocking: :shocking: dumb arse :lol: :lol: :lol: :lol: :lol: :lol: :lol: :owned: |
Originally Posted by KNONFS
(Post 7596171)
Mate,
I've seen this engine, have you? Trust me (and those that have seen it), it is not a PP :) |
Originally Posted by RR water injection #1
(Post 7596174)
Its a paridy on Microtech # 1
:shocking: :shocking: :shocking: :shocking: :shocking: :shocking: :shocking: dumb arse :lol: :lol: :lol: :lol: :lol: :lol: :lol: :owned: |
i seen the engine and i know that its not a PP and its not build by any australian company,when the car first came out a couple of years ago the car ran a PP motor
turbo intercooler then they change the combination to a semi PP with meth reaching around 980 hp(there its a video around with the dyno pulls and you can see the motor)then a couple of weeks ago they change the turbo sistem and the entire intake setup in order to reach the 6 second barrier |
Anonther camera angle of the record setting run compliments GRS Motorsports..
http://grs-motorsports.com/noticias/...ic/sporty2.wmv |
Whoever banned rice, thank you.
|
Does anyone know how much this car weighs?
|
that video inspires me
|
Fuck you Rice.It's that all you do is hate on everything that has proven you wrong? Fuck off mate
|
Wow... 1100 hp out of 80 cubic inches. Amazing, and congrats. Anyone have any idea on how many runs they get out of an engine at that power level?
Also, love the 7s in the ET and mph! Divine intervention courtesy of Felix I'm sure ;) Anyone know what turbo and boost level he's running to put down 1100 hp? Also interested to know his vehicle weight. |
Totally awesome run. It was coming sooner or later. My money was on Pica but I quess I was wrong. Congrats to the Sporty crew.
|
All times are GMT -5. The time now is 04:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands