2 step, antilag, launch control? plz help
i have been looking online and searching on here. all i am finding is lots of miss interpretations and back and for debates.
right now i am running apexi ecu what i am looking to do is have a system to spool right off the line and also be able to shoot flame holding idle and a designated point any recommendations on what unit to get wold be great im sure i will catch flak about this something simaler to this video on utube not my car or anyone i know here is another im fairly sure that the first video is an antylag setup and the secon video is a 2 step/ launch control |
this is a unit i found online but in my searching on here a member said this will not work with rotaries. can someone shed some light on this and if u wold recommend it or not?
Gizzmo Launch Interface https://www.himni-racing.com/index.p...vh8ekr5837t701 |
also the other unit i came across is the bee-r anyone runing this on there fd?
|
Ok first thing SEARCH, there’s a quite a few great threads in this section alone.
2 Step and-launch control are interchangeable terms, proly coined by MSD, which lets you have a Staged rpm limit, I.E. 2 rev limiters, one for max rpm, 1 for staging. Anti Lag is something rally cars use between shifts, IIRC the New MSD 6al boxes have ones that have a 2 step built in. If not get a Dis-2 Easy way is to set up the 2 step off the clutch switch with a master arm switch, this when active (foot on clitch) lets power activate the lower-aka staging rpm, but with your foot on the floor the ECU is still sending fuel trying to raise RPM, hence the backfiring and flames. Cheapo way is 1 box on the Leadings with factory leading coil, and wire it so it shuts off trailing coils when active, Right way is to have RPM limit on all ignition channels, and through a Aux input on the ecu , retard timing and add fuel. I’m going to comment on your request to have flames shoot out of the exhaust, it’s a byproduct caused by the purpose, its hard on the engine and turbos, loud and not setup properly can kill motors, I hope you have a substantial single turbo system that requires this as most of us drag racers do, not just to look like a tool in front of your friends. |
this is for when i go to the strip no just show boating like a jackass lol
was looking at the new msd 6al-2 shes looking like a winner to me ty for the input as well |
All times are GMT -5. The time now is 12:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands