whats the most power out of any N/A rotary vehicle
whats the most power or the fastest quater mile or top end that anyone has ever gottin out of a N/A rx7 or any other rotary powerd vehicle?
|
there are some 9 sec na cars in AUSTRALIA and Puerto Rico...
|
The Mazda 787B LeMans winning car had 700 bhp @ 9000 rpm and 620 ft/lbs of torque at 6500 rpm.
Naturally aspirated 4-rotor. |
Re: whats the most power out of any N/A rotary vehicle
Originally posted by krackerx7 whats the most power or the fastest quater mile or top end that anyone has ever gottin out of a N/A rx7 or any other rotary powerd vehicle? |
in OZ the fastest all motor rotor I know of is a honda s600 13b pp running 10.5 or 10.4 - never heard of an all motor, or even nitroused motor running faster in this country.
........not yet. |
Ito has a fast ass N2O car, I believe it runs 8's, I'll go grab specs if I can find them.
It's in a RX-3 I think, can't really remember *edit* crap, he already posted. ha ha, Ito, post some stats for the men |
Originally posted by Node Ito has a fast ass N2O car, I believe it runs 8's, I'll go grab specs if I can find them. It's in a RX-3 I think, can't really remember *edit* crap, he already posted. ha ha, Ito, post some stats for the men |
Re: Re: whats the most power out of any N/A rotary vehicle
Originally posted by Judge Ito Here in the east coast, we had a real nice 2nd gen. Rx7 a full chassis drag car, he was running a 13B Mazda Factory Racing P-Port engine with some Roger Mandeville help with the tunning and ran a real nice 9.56 @135mph this was done on "ALL MOTOR" the car's name was "Party Time" the car no longer exist. they made it turbo charged ran 8.1 and later they tried to bring the boost up, the car got out the groove real bad and was totaled. destroyed.:( Was a VERY nice car! |
[i]hey Node out of Puerto Rico I have a buddy with a Mazda Miata with a 13B P-Port ad some N20 running 8.55@153mh. his name is "Albert Vivo" thats the fastest N/A N20 rotary engine in the planet, [/B] Hey Ito, few years ago there (about 5 years ago) there was a Yellow Wide Body FB, 13B fuel injected, running in Atco. He was running the 10's or 11' (can't remember) constantly, and I am almost sure he was from Florida. Do you know who I'm talking about? Thanks, Elio |
Originally posted by KNONFS BAM BAM:D ! Hey Ito, few years ago there (about 5 years ago) there was a Yellow Wide Body FB, 13B fuel injected, running in Atco. He was running the 10's or 11' (can't remember) constantly, and I am almost sure he was from Florida. Do you know who I'm talking about? Thanks, Elio |
What a nice Miata :) I thought you ran 8's, maybe I got confused. I believe it was the drag slip sticky thread.
Oh well, that's still incredible :) |
Originally posted by Judge Ito Elio, If I recall, I think it was Eddie Bello with that wide body yellow FB, the next year he came back with a Nissan 300zx V6 twin turbo engine on that same wide body FB. Eddie Bello is from NYC -Ted |
Originally posted by RETed The same Eddie Bello that went to JAIL? :eek: -Ted |
Originally posted by Node What a nice Miata :) I thought you ran 8's, maybe I got confused. I believe it was the drag slip sticky thread. Oh well, that's still incredible :) |
I picked this up from another thread but did not know how to link to it so I copied it across. See the power figures from Rohan Ambrose's car from Australia. This is non turbo 13B bp.
Cheers, twister quote: -------------------------------------------------------------------------------- Originally posted by Judge Ito Rohan and Anthony Rod's were having a seminar for Micro-Tech yesteray, the new LTseries(Laptop) They invited all the local import shops from the north east coast to the seminar. Some nice features the LT series has. After the seminar Rohan was telling me about his Bridgeport FI engine making power well into the 11,000 RPM range with his intake manifold, that is wicked 290rwhp N/A yes!!! I haven't seen Haltech trying to set up a group of tunners before they sell there product on the market like Micro- Tech is trying to do. I say hands up to Micro-tech for making sure before they start to open a dealer base in the US they have tunners available. Good to see Anthony Rod's back in gear looking to drag race soon.. -------------------------------------------------------------------------------- Excellent, I am pleased you caught up with them both, great guys with some great stuff! I have raced Rohan with his set-up, sh__ it goes! Did he show you the gears etc from his dogbox, again that product is awesome. |
Originally posted by Judge Ito Node u are not to far off, In the drag thread I posted that soon Ill be running for the 8's with my new proyect. Mazda Rx3 SP. N/A N20 set up... |
Originally posted by 13BAce RX-3? It looked like a bunch of steel tubes when I saw it.;) |
Originally posted by twister I picked this up from another thread but did not know how to link to it so I copied it across. See the power figures from Rohan Ambrose's car from Australia. This is non turbo 13B bp. Cheers, twister quote: -------------------------------------------------------------------------------- Originally posted by Judge Ito Rohan and Anthony Rod's were having a seminar for Micro-Tech yesteray, the new LTseries(Laptop) They invited all the local import shops from the north east coast to the seminar. Some nice features the LT series has. After the seminar Rohan was telling me about his Bridgeport FI engine making power well into the 11,000 RPM range with his intake manifold, that is wicked 290rwhp N/A yes!!! I haven't seen Haltech trying to set up a group of tunners before they sell there product on the market like Micro- Tech is trying to do. I say hands up to Micro-tech for making sure before they start to open a dealer base in the US they have tunners available. Good to see Anthony Rod's back in gear looking to drag race soon.. -------------------------------------------------------------------------------- Excellent, I am pleased you caught up with them both, great guys with some great stuff! I have raced Rohan with his set-up, sh__ it goes! Did he show you the gears etc from his dogbox, again that product is awesome. |
Originally posted by Judge Ito SHHHHHHHHHHH:D Yes full chassis chrome moly, I need to be super light if I want to touch the 8 second zone on that 13B n20 set up. Hey Jim are you going to the BBQ? |
All times are GMT -5. The time now is 07:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands