True Performance Gains w/ Side Draft
 

So i've been searching around for a while looking for info on side draft carbs. From what I have found so far it seems like a good upgrade. But what I have found also raises a couple questions.

First, for those of you who have these, what kind of performance gains have you seen? Anything on a 4 port 12a?

also, where would be the best place to find one and what kind of prices would i be looking at for it?

~Sup

I hope the gains are worthwhile ... this is my project

http://www.mazdarotaryclub.com/forum...highlight=quad

pics

https://www.rx7club.com/attachment.p...chmentid=73598

https://www.rx7club.com/attachment.p...chmentid=73601

But... those don't look like carbs. ;)

Don't have much other input, sorry.

It sure as hell looks nice though

WOW, you are da'man!

Keep us posted once you finish it :D

Good luck!

Has anybody ever tried motorbike carbs on a rotary, like Mikuni or Keihin flatsides?

When do you think your project will be finished Mike?

work on the car will start whenever I aquire all the bits, looking for some inlet rubbers at the moment.

seeing as its nearly winter my aim will be to have it taken off the road, all injection parts fitted + a Carl exhaust system fitted by spring next year :) I'm hoping I will have it running on the EFI well before that though to give me time to get it sorted.

Mike

btw that manifold is made by TWM for a pair of 45DCOE webers, they still make the 13b version so you can either look out for a secondhand one like I got or buy new + a 12a-13b adapter.