Show me your pics of your engine bay!
I am trying to get some ideas with my FD.
Show me your engine pics!!! Thanks! |
|
not much but here ya go
|
Thanks guys keep it coming.
AArotary: How easy was it to get a custom flange for that IC pipe to your BOV? Can you get a custom flange for an Apexi BOV for that IC pipe? WHo can do it? and how $$? |
Originally posted by AARotary Here is my engine bay.:cool: http://www.importstreetscene.com/iss/alex/17.jpg |
Originally posted by rx7eaven What kind of single turbo did you go with. Very nice and VERY clean. You have the nicest FD that I have ever seen. :cool: :D AArotary has a Greddy T-78!! 95 RX7 black touring T-78, stk motor Haltech E6K 97 Supra TT Red 02 YZF-R6 next month |
Originally posted by kamikazeRyan AArotary has a Greddy T-78!! 95 RX7 black touring T-78, stk motor Haltech E6K 97 Supra TT Red 02 YZF-R6 next month |
Either go with the Greddy type-R or the HKS SSQV or the HKS racing sequential BOV but it cost alot more.
|
AArotary: Is there any spots in the engine bay to place a BOV besides flanged on a pipe?
|
I think you have to custom a flange or you can buy a kit for the RX-7 and it comes with all the hardware to mount the BOV.
|
http://www.vosko.net/photos/original/Engine.jpg
OLD engine bay..... will have new pix when car is put back together :) |
Here's my old set up went front mount
|
Early pic....intake box not installed...
http://wsphotofews.excite.com/011/YL/jr/AN/7v69094.jpg intake box installed and changed to sard bov and changed to 99 JDM factory strut bar http://wsphotofews.excite.com/020/7Y/Dq/bb/m847548.jpg with Fluidyne, blitz FMIC, Sard BOV and grounding wires. http://wsphotofews.excite.com/035/gH/Kq/Pe/qL60494.jpg will polish the piping and upper manifold and do some detailing later :p David |
7 eleven your engine bay rules!
Like the greddy piping. AArotary: where can you buy pipes with flanges already set up on them? Any sites? What about a flange for an HKS SSBOV? |
I think the rx7 store sells the greddy elbow with a flange welded into it. Just email jason.
|
Yeah Billy, I know Jason has one with a flange. But for only the Tpe R BOV. I kinda want to know if there is one for a HKS SSBOV. I saw a pic form Under PSI that had that setup. But hes hasnt PM'd me back.
|
Originally posted by Rx7rookie21 Yeah Billy, I know Jason has one with a flange. But for only the Tpe R BOV. I kinda want to know if there is one for a HKS SSBOV. I saw a pic form Under PSI that had that setup. But hes hasnt PM'd me back. |
That is true. I could do that. I would be afraid they would mess up the polish of the elbow. I might do that.
Thanks! |
Originally posted by AARotary Either go with the Greddy type-R or the HKS SSQV or the HKS racing sequential BOV but it cost alot more. |
it's alot bigger and different looking. also for mad boost and car's with over 500hp or some crap they say. can withstand like 3bar:D
|
|
Any more engine pics???
Anybody have polished aluminum intake pipes? |
My engine bay
Still stock looking but I'll add some useless shiny things for Christmas.
http://communities.msn.com/MyRX7sand...oto&PhotoID=61 |
anyone ever polsihed then got there IC piping and other lauminum stuff anodized? That would be different. I know a few tuners (PFS) powdercoat some of the stuff, mainly the IC Piping.
|
Only visible mods are the K&N and the Paxton; the bdfpr is tucked down on the firewall.
https://www.rx7club.com/vforums/atta...&postid=217522 |
Node what is your 7 look like?
|
Don't have one now. Getting a FC (hopefully T-II)
I'll keep that bay tidy if it has any kinda power behind it (read stock lol) |
Has any of you used RX7 Fashion's polished pipe intake kit? If you do, do you have pics? Kinda thinking of buying it.
Unless I want to pay $740 for the HKS SMF and pipe kit. Looks awesome. |
I have the rx7fashion polished intake pipes and they look great. :)
|
Heres some I dug out from my E drive, forgot I had them! :D
http://users.bigpond.net.au/ajc13b/defro-1.jpg http://users.bigpond.net.au/ajc13b/defro-2.jpg http://users.bigpond.net.au/ajc13b/defro-3.jpg |
:eek:
the brake fluid is on the wrong side ??? |
No comments about the bumper or light covers. They're getting prepped for paint as we speak.
|
Im impressed with the look ACJ. Going for show? Right...
What turbo is that? Everbody Keep an eye on this posting I'll be adding mine when my engine is finished in Dec. :( Heres a list of what ive got too keep you looking... :D GReddy FMIC (3 Row) :mspank: T04S HKS Racing Wst. Gate Power FC Pullys Apex'i BOV Jacobs: Ign. Box, Coil, Wires Street Ported RP fuel pump 1300cc Injectors 9.5 lb flywheel ACT 6-Puck w/ heavy duty plate GReddy Intake Ripper Shifter Alpine head unit RF 10" He Sub w/ 360 Amp. Radiator Happy Rotoring, :allcho: Ryker P.S. I need to sell some extra parts... Apex'i dual N1 GReddy SMIC Bonez Down Pipe stock 850cc injectors Stock: -Smog pump -IC -AirBox -Twins w/ manifold -Head unit/Cdplayer combo -Rear Bose Acoustic Wave System --Email Me if you want to pick one of these items up-- |
yeah AJC, thats one badass engine bay, it yours?
|
Originally posted by puma :eek: the brake fluid is on the wrong side ??? |
Yeah AJC your engine looks tight!
Hey Gene (RX7 Rage): Show me pics of your engine bay or e-mail them to me? I like to see the intake pipes, I might purchase them. I can't believe you didnt tell me before!! ;) |
Originally posted by Rx7rookie21 Yeah AJC your engine looks tight! Hey Gene (RX7 Rage): Show me pics of your engine bay or e-mail them to me? I like to see the intake pipes, I might purchase them. I can't believe you didnt tell me before!! ;) |
Originally posted by billyrohm I think the rx7 store sells the greddy elbow with a flange welded into it. Just email jason. Thanks, Nick |
Greddy elbow with greddy type s bov flange is $200 at RX7store.net.
Thanks Gene for taking the effort to take some pics of your polished intake pipes. |
Originally posted by merciless right hand drive... |
I wish it was my car! The workshop I go to did this car...It is a Sony promo car now!
I think you all missed the fact that its a 20B too.... :D |
Originally posted by AJC13B I wish it was my car! The workshop I go to did this car...It is a Sony promo car now! I think you all missed the fact that its a 20B too.... :D |
I did too.
BTW are the primaries all equal lenght? I'm just curious because the turbo sits so far forward. |
I noticed too :)
I think all the runners are equal length, on the plenum. Or did you mean the intercooler plumbing? |
So is it really safe to polish the intake plenium?
I mean straight take it off and take it to somebody to be polished. |
Originally posted by Rx7rookie21 So is it really safe to polish the intake plenium? I mean straight take it off and take it to somebody to be polished. I was lazy and painted mine, but I don't like the way it looks. So when I have the time I'll polish it. |
so wait, http://www.xplod.com.au/cars/view.cfm?car_id=340 this is your workshops car ive been fantasizing over all this time?
that car is beautiful seems like a great shop |
Originally posted by AJC13B I wish it was my car! The workshop I go to did this car...It is a Sony promo car now! I think you all missed the fact that its a 20B too.... :D |
Node is that an official SONY car?
That car is tricked out with plush interior. Must feel good in the winter time! :) Everybody check that link out. That 7 has Sony everything on it. Doesnt show any engine pics though. :(..... |
Originally posted by Node so wait, http://www.xplod.com.au/cars/view.cfm?car_id=340 this is your workshops car ive been fantasizing over all this time? that car is beautiful seems like a great shop Originally posted by FourtyOunce is that an NPR intercoooler upfront??? Originally posted by Rx7rookie21 Node is that an official SONY car? That car is tricked out with plush interior. Must feel good in the winter time! :) Everybody check that link out. That 7 has Sony everything on it. Doesnt show any engine pics though. :(..... |
All times are GMT -5. The time now is 10:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands