Show me your pics of your engine bay!
I am trying to get some ideas with my FD.
Show me your engine pics!!! Thanks! |
|
not much but here ya go
|
Thanks guys keep it coming.
AArotary: How easy was it to get a custom flange for that IC pipe to your BOV? Can you get a custom flange for an Apexi BOV for that IC pipe? WHo can do it? and how $$? |
Originally posted by AARotary Here is my engine bay.:cool: http://www.importstreetscene.com/iss/alex/17.jpg |
Originally posted by rx7eaven What kind of single turbo did you go with. Very nice and VERY clean. You have the nicest FD that I have ever seen. :cool: :D AArotary has a Greddy T-78!! 95 RX7 black touring T-78, stk motor Haltech E6K 97 Supra TT Red 02 YZF-R6 next month |
Originally posted by kamikazeRyan AArotary has a Greddy T-78!! 95 RX7 black touring T-78, stk motor Haltech E6K 97 Supra TT Red 02 YZF-R6 next month |
Either go with the Greddy type-R or the HKS SSQV or the HKS racing sequential BOV but it cost alot more.
|
AArotary: Is there any spots in the engine bay to place a BOV besides flanged on a pipe?
|
I think you have to custom a flange or you can buy a kit for the RX-7 and it comes with all the hardware to mount the BOV.
|
http://www.vosko.net/photos/original/Engine.jpg
OLD engine bay..... will have new pix when car is put back together :) |
Here's my old set up went front mount
|
Early pic....intake box not installed...
http://wsphotofews.excite.com/011/YL/jr/AN/7v69094.jpg intake box installed and changed to sard bov and changed to 99 JDM factory strut bar http://wsphotofews.excite.com/020/7Y/Dq/bb/m847548.jpg with Fluidyne, blitz FMIC, Sard BOV and grounding wires. http://wsphotofews.excite.com/035/gH/Kq/Pe/qL60494.jpg will polish the piping and upper manifold and do some detailing later :p David |
7 eleven your engine bay rules!
Like the greddy piping. AArotary: where can you buy pipes with flanges already set up on them? Any sites? What about a flange for an HKS SSBOV? |
I think the rx7 store sells the greddy elbow with a flange welded into it. Just email jason.
|
Yeah Billy, I know Jason has one with a flange. But for only the Tpe R BOV. I kinda want to know if there is one for a HKS SSBOV. I saw a pic form Under PSI that had that setup. But hes hasnt PM'd me back.
|
Originally posted by Rx7rookie21 Yeah Billy, I know Jason has one with a flange. But for only the Tpe R BOV. I kinda want to know if there is one for a HKS SSBOV. I saw a pic form Under PSI that had that setup. But hes hasnt PM'd me back. |
That is true. I could do that. I would be afraid they would mess up the polish of the elbow. I might do that.
Thanks! |
Originally posted by AARotary Either go with the Greddy type-R or the HKS SSQV or the HKS racing sequential BOV but it cost alot more. |
it's alot bigger and different looking. also for mad boost and car's with over 500hp or some crap they say. can withstand like 3bar:D
|
|
Any more engine pics???
Anybody have polished aluminum intake pipes? |
My engine bay
Still stock looking but I'll add some useless shiny things for Christmas.
http://communities.msn.com/MyRX7sand...oto&PhotoID=61 |
anyone ever polsihed then got there IC piping and other lauminum stuff anodized? That would be different. I know a few tuners (PFS) powdercoat some of the stuff, mainly the IC Piping.
|
Only visible mods are the K&N and the Paxton; the bdfpr is tucked down on the firewall.
https://www.rx7club.com/vforums/atta...&postid=217522 |
All times are GMT -5. The time now is 05:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands