RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Rotary Car Performance (https://www.rx7club.com/rotary-car-performance-77/)
-   -   KKK Turbo Question (https://www.rx7club.com/rotary-car-performance-77/kkk-turbo-question-670054/)

Kim 07-11-07 03:21 AM

KKK Turbo Question
 
3 Attachment(s)
Will this turbo support 220-250 RWHP on my 12A blowthrough Streetport ?

I know very little about turbos so be gentle :)

Kim

Kim 07-11-07 07:46 AM

BTW, it's a K27 turbo, if that's any help

OneRotor 07-11-07 09:02 AM

that looks tiny. Isn't that the turbo off of the VW 1.8T?

cptpain 07-12-07 04:40 PM

the turbo will support up to or about 200hp but from its small compressor side, that turbo will only produce that power in the low to mid rpm range and the hot side is not good for a rotary, a stock turboII turbo hot side is about twice that size.

as well from a rotary stand point, you will not see any benefit from this turbo at all, it will give some great low end torque but from its small size will quickly wear off as our engines spin towards 8k and that turbo is paired to a motor that runs out of breath at 5k and redlines at 6.5k.
drive a 1.8 jetta or golf, you'll know what i mean

just get a rebuilt S5 turbo

Kim 07-12-07 07:42 PM

K Thanks
Guess I'll go for the Rotaryshack Hybrid.

Kim

harris2182 03-06-10 11:20 AM

1 Attachment(s)
thats not a k27. its way to small.

harris2182 03-06-10 11:21 AM

this is my kkk k27 turbo.

rx71king 03-06-10 11:48 AM

use a s5 turbo. it is lots of fun on the 12a

Gaber 03-13-10 03:43 AM

harris2182 - do you have more info about k27 turbo, how response on 13b? I'am thinking put that turbo on fc.. There was blitz turbo kit with k27..

Gaber 03-20-10 07:55 AM

bump..

I see that Japanese use a lot this turbo on they fc-s..

jdmfc3s90 03-20-10 02:06 PM

I do own a KKK k27 turbo. Its rather large. I dont have that manny specs of the turbo like a/r size and so forth. Im off to work, but when i get home ill take some pictures and gather as much info as possible.

Gaber 03-21-10 02:17 AM

Thank you..

I am most interested in spooling time, full boost etc.

Thanks,

jdmfc3s90 03-23-10 07:55 PM

Heres a link to some info on the turbo.
http://www.more-japan.com/home.php?c...ction=0&page=2

It leaves out some info on the a/r sizes for compressor and exhaust. How ever as i understand it this turbo compares to larger turbos like greddys T-78 or HKS' T04z. While supporting high horse power, turbo lag increases. I would think you can begin to hit full boost around 4k rpm or higher. I have not installed on my fc so i dont know for sure.
I bought mine from japan the owner was pushing 500ps at 15psi in an FC. Heres a few pictures.

http://i288.photobucket.com/albums/l...h__3220760.jpg

http://i288.photobucket.com/albums/l...h__3220764.jpg

http://i288.photobucket.com/albums/l...h__3220767.jpg


All times are GMT -5. The time now is 07:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands