Rotary Car Performance General Rotary Car and Engine modification discussions.

Help!

Thread Tools
 
Search this Thread
 
Old Jul 12, 2002 | 12:36 AM
  #1  
Drakk0r's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 171
Likes: 0
From: Columbus, Ohio
Exclamation Help!

This is just an effort to direct more attention to my thread. I've been having some wierd probs with my car and need some help. I'm running out of ideas... Here's the rundown...

Turbocharged N/A (see sig for list of mods)
Car wont boost over 0 psi manifold pressure
Car seems to hit a fuel cut or rev limiter once it tries to hit boost (wont rev any higher, all power lost)
Timing in spec
TPS in spec, replaced anyway
Battery charged
Intercooler ducting checked/bypassed/then checked again
I can see the turbo blades spinning freely, and the boost gauge shows its trying to make boost
I've tried running with both a TII and N/A pressure sensor

I've completely documented everything I've done to the car in the original thread, here;
https://www.rx7club.com/forum/showth...threadid=93022
Reply
Old Jul 12, 2002 | 06:37 PM
  #2  
Drakk0r's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 171
Likes: 0
From: Columbus, Ohio
ttt
Reply
Old Jul 14, 2002 | 01:28 AM
  #3  
Scott 89t2's Avatar
SOLD THE RX-7!
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
try unpluging the boost sensor and plug the vac line. maybe the ECU doesn't like it seeing boost.
Reply
Old Jul 20, 2002 | 03:04 PM
  #4  
relvinnian's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 585
Likes: 0
From: Columbus, Ohio
Tried that... Doesnt help...
Reply




All times are GMT -5. The time now is 09:34 AM.