rx7 vs trans am
just filled up at the gas station and was home...when a white TA pulled up next to me at the light. I wasnt going to play with the guy 'cause I just filled up...so I slowly take off from the light. He blips the throttle and takes off and lucky me I end up meeting him at the next light......this time we have two cars in front of us. Now I dont know if this is all just coinsidence....but as soon as we cross the rail road tracks both cars decide to turn out of the way...we r both in first gear....I look at him and I give him the go ahead to take off. He floors it and so do I....instantly I jump a half a car on him....second gear he jumps back about to my rear wheel....in third he started pulling up a little and then I started pulling on him again.....we started braking as soon as we hit 4th. Im thinking that he was stock with an exhaust(It did sound really good). He gave me the thumbs up at the end of the race and said that he thought my car was stock.....really cool guy though :bigthumb:
|
*Pettit Racing 1.3L 13B-REW street ported engine w/3mm apex seals.
*99' J-spec ceramic coat, ported and blueprinted twin turbos. *NGK leading and trailing platnium plugs. *10mm Magnacore spark plug wires. *Upgraded Goodyear boost and vacuum hoses. *Pettit Racing cold air intake. *Pettit Racing 3" stainless steel downpipe. *Pettit Racing aluminum coolant AST. *ACT extreme clutch. *Pettit Racing 8.5lbs flywheel. *Pettit Racing 60/40 short shifter. *HKS Super SEQ BOV kit. *Koyo radiator. *RX7 Trix battery relocation kit. *Blit Dual Turbo Timer w/harness http://www.cardomain.com/ride/806146 |
nice way 2 put the piston engine in its place. by the way love you car
|
how much boost are you runnin? if you were runnin more than 12lbs, you should have walked all over him with yor mods.
|
nah...stock boost 10-11psi.
|
oh, ok, well, nice kill man, and nice setup. hopefully will be there (non ported though) by the end of the year.
|
makes me proud to run close to stock boost levels on stock twins!!!! Good kill!
|
Originally Posted by rotaryboy4175311
nice way 2 put the piston engine in its place. by the way love you car
nice kill |
if you let him hit it first then you jumped him, he must have started in second or something?
he has twice the torque and no turbo lag, anyway nice kill. |
put a midpipe on, get a piggy back ecu and crank teh boost to 14 and its a whole different car.
|
Originally Posted by iceman4357
put a midpipe on, get a piggy back ecu and crank teh boost to 14 and its a whole different car.
|
i was gonna say..yeah i have pretty much ur set-up but i have a greddy SMIC and a PFC running 14 psi. I got pulled by a camaro with a 150 shot by 3 cars...so yeah, and that was on my pettit. Gettng the pfc tuned tommorow :)
|
Originally Posted by iceman4357
put a midpipe on, get a piggy back ecu and crank teh boost to 14 and its a whole different car.
|
All times are GMT -5. The time now is 11:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands