Jack Mardikian FD3 Time Attack Dyno Video
We had Shane Teckelburg doing a tune up on Jack Mardikians FD3 on our DynaPack dyno last Friday. We made a few changes and wanted to see what we were working with .
Did a few pulls, Shane made a few changes. Ended up with 480HP and 420 lbft at 20.5 lbs of boost. from last time on the Dynapack we are down 20hp but up 20 lbft of tq. we are pretty pleased with the results. Hopefully we will run her at the RedLine Time Attack July 19-20 @ Cali Speedway ROVAL. Should be good times.. Check out the video http://youtube.com/watch?v=d_gBA10pmho |
nice!
|
wats da mods? turbo size? nice tq numbers
|
Nice!
I met Jack M at a NASA event a couple of months ago. Very nice guy. Very helpful. Very fast!. |
His in car video is great to watch.
Paul |
Holy crap, that car is nuts. Love the videos, seen couple of other ones of the car in action on the track. I'm going to the CA speedway event to watch, it would be cool to go with some other rotary folks...
|
That should rip! Not much left of that hood ;)
|
Shane is the man!
|
Originally Posted by joe-c
(Post 8271023)
wats da mods? turbo size? nice tq numbers
Thanks for the support guys. As far as the mods go, everything is custom fabbed on Jacks car. we started with the engine and built it from there. Custom Header and D/P with 4" d/p, 5" oval to 5" round. turbo is a BorgWarner Bullseye S366. ECU is MoTec M800 with custom engine and chassis harness by Greg Pyles at GP Motorsports, tuned by Shane Tecklenburg on Dyanpack dyno, aim sports dash. Intake manifold is stk but heavily modified. 3 oil heat exchangers, Custom "V" mount set up with intercooler and custom Radiator with external swirl pot and 2nd get water pump. custom fuel system with sumped stk tank, external aeromotive ae1000 fuel pump, Weldon FPR and filters, 96lb hr injectors. everything is ducted for clean air flow. Accusump system with canton oil filter, custom crankcase breather set up, Penske 8760 3 way adj shocks AP brakes..Lots more .. http://i31.tinypic.com/29g05xy.jpg http://i30.tinypic.com/11rui5k.jpg |
Great numbers, what fuel are you guys using?
BigAl... |
Originally Posted by BigAl...
(Post 8276596)
Great numbers, what fuel are you guys using?
BigAl... We are using C16 |
AWESOME! One of my favorite FD's of all time. Congrats and good luck.
|
So I had to wait and see it in Super Street, but the car burned at Long Beach? How bad?
|
Not bad at all...the heat was mainly paint burning off. there was a very small leak also but it didn't cause any fire. the foam extinguisher we have worked great and had the fire out in seconds with no damage. the fire marshal was very excited to use his extingusher "Wow this is my first fire, i cant wait" and proceeded to douse the engine in that powder crap which is very hard to clean and corrodes everything. we actually had the car fixed in about an hr at the shop. the clean up from the powder took 3 days.
She is back and ready again for Jack to unleash her at CALI speedway next month. Eric |
CAL SPEEDWAY will be a good opportunity to get a big group ride together for support.
|
Nice numbers! Might see you at the track for the TA if I can get everything back together in time...would be a good rotary showing!
|
Hope to see you there Danny!
|
pits?
This is sort of off topic, but are you guys going to be available to show the car in the pits? I'm planning on going to the CA Speedway event to show some rotary support for you guys and take some video and pics. I would LOVE to take a closer look at the car, meet the owner/driver/mechanic and see how it's set up.
That thing is truly badass. :D |
Originally Posted by Twins Turbo Motorsports
(Post 8278754)
the fire marshal was very excited to use his extingusher "Wow this is my first fire, i cant wait" and proceeded to douse the engine in that powder crap which is very hard to clean and corrodes everything. we actually had the car fixed in about an hr at the shop. the clean up from the powder took 3 days.
|
Ya, the powder is a mess. Since our encounter with the powder extinguisher, we have put a fire system in all of our cars here at the shop. We use the OMP AFFF Foam system and it worked amazing.
Originally Posted by mdpalmer
(Post 8292263)
This is sort of off topic, but are you guys going to be available to show the car in the pits? I'm planning on going to the CA Speedway event to show some rotary support for you guys and take some video and pics. I would LOVE to take a closer look at the car, meet the owner/driver/mechanic and see how it's set up.
That thing is truly badass. :D -Kevin |
still going?
Originally Posted by Kevin@TwinsTurbo
(Post 8295790)
Ya, the powder is a mess. Since our encounter with the powder extinguisher, we have put a fire system in all of our cars here at the shop. We use the OMP AFFF Foam system and it worked amazing.
At Cali Speedway i believe it will be open pits so if you are there please come by and say whats up, meet the driver and crew and take loads of picts. -Kevin http://www.redlinetimeattack.com/DL_AutoClub.html I'm still planning on going. to watch and whatnot. |
Originally Posted by mdpalmer
(Post 8389978)
Hey are you guys still going to the time attack? I don't see your car on the list of drivers/cars... :scratch:
http://www.redlinetimeattack.com/DL_AutoClub.html I'm still planning on going. to watch and whatnot. |
been following the car and its progress, very cool stuff, great work!!
|
Did this car catch on fire again?
|
Originally Posted by phinsn98
(Post 8452505)
Did this car catch on fire again?
|
All times are GMT -5. The time now is 08:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands