Basic drag setup question..
well I have stock springs
and AGX in the back
I tried soft in the rear
and did not work good
So I assume
you really want the front to rise up fast
and put pressure on the rear tires...but to do this the shocks have to be set to firm (not stiff)
you can also disconnect the front sway bar at the track
im in the same boat
but trial and error is what is called for here
and AGX in the back
I tried soft in the rear
and did not work good
So I assume
you really want the front to rise up fast
and put pressure on the rear tires...but to do this the shocks have to be set to firm (not stiff)
you can also disconnect the front sway bar at the track
im in the same boat
but trial and error is what is called for here
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
msilvia
3rd Generation Specific (1993-2002)
15
Sep 11, 2015 12:13 PM




