RX7Club.com - Mazda RX7 Forum - Power FC which wires?

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- Power FC Forum (https://www.rx7club.com/power-fc-forum-47/)

- - Power FC which wires? (https://www.rx7club.com/power-fc-forum-47/wires-11642/)

carpediem73

07-25-01 02:51 PM

which wires?

Just got my Power FC yesterday and wanted to know what color the wires were that I should cut? Do you cut the wires or pull the pins which is best? Also my power fc appears to be a newer model than my commander. Will this effect anything?

TYT 7

07-25-01 06:29 PM

3J - Blue/green stripe (EGR switch)
4O - Blue/Yellow stripe (EGR solenoid valve)
4P - Brown/Yellow stripe (AWS)
4F - Black/Red stripe (Split air bypass)

You can cut them or pull them out. I pulled them out (open the connector and slide a paper clip in while pulling on the wire)

Rx7aholic

07-05-05 09:39 PM

Why mess with the split air bypass wires? I can see the others but the 5th gear need the split air according to the manual, I left the Red/black and test drove my car and it ran fine no problem,

All times are GMT -5. The time now is 05:41 AM.