Voltage Correction ?
I was just curious what kind of changes are you guys havin to make as far as: Fuel Injection Correction?
Acceleration Enrichment? Injector Pulse Timing? These are the only few things that are really confusing to me right now, any help would be much appreciated... JDub |
The changes I made were mainly needed when going to 1200cc secondaries, 850 to 1200 size .10 injector lag correction.
For better throttle tip in responce, I reduced the 1000 rpm decay time value from 2.0ms to 1.0ms. This adjustment is similar to making changes to the acceleration system/jets to a carb and added a litle bit more fuel. |
Originally posted by cewrx7r1 The changes I made were mainly needed when going to 1200cc secondaries, 850 to 1200 size .10 injector lag correction. For better throttle tip in responce, I reduced the 1000 rpm decay time value from 2.0ms to 1.0ms. This adjustment is similar to making changes to the acceleration system/jets to a carb and added a litle bit more fuel. I have not tried messing with the acceleration. I did change the primary/secondary transition time per a message on the Datalogit forum and it seemed to help. I think it went from 1.5 to like .98.. Im in Chile write now so I cant check. (This spanish keyboard is screwing with me too...all my punctutation has changed!) |
All times are GMT -5. The time now is 10:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands