Non-sequential street port tune request
I believe I'm only a few weeks away from getting the car ready for its first start up so I wanted to go ahead and see if I could find a base map for the following:
-RX7Store stage 3 ported engine w/ 12a front cover -twin turbos set up as non-sequential -stock primary injectors, FFE Step up kit w/ Bosch 1650cc secondary injectors (includes Fuelab fpr) -Bosch 044 fuel pump -Pettit intake -Downpipe to custom 3" exhaust, no cat, only muffler -no OMP -custom vmounted intercooler -Greddy elbow -no emissions (most everything that could be blocked off is) -no airpump (only alternator and waterpump) please let me know if there is any other information that's needed. thanks! |
hi guys,
there's gotta be someone w/ similar enough tune that i can use to start the motor up to check for leaks. also, correction...secondary injectors are bosch 1700's. thanks. |
The Apexi base map should allow you to start the car, you are running stock primaries.
|
thanks for the info banzai. if anyone has a good map with similar mods, please contact me.
|
I ran 13B-REW non-seq for about 6 years at up to 16psi boost, but with blue printed stock ports, not large ports.
You can have it but would need to change the timing, and fuel. My injectors were 550/Bosch 1600. My fuel delivery system was greatly modified for more flow. |
All times are GMT -5. The time now is 03:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands