Apexi power fc question
Hi I have a 93 rx7 and Im going to build it up to about 500hp but when it comes to the computer tuning I have no clue what to do so my question is will a Apexi power fc hold up to 500hp or will I have to switch to a Haltech. I would really like to use the Apexi power fc because they are pretty cost effective any suggestion.
Thanks |
From the looks of this thread, I'd say its possible:
https://www.rx7club.com/power-fc-for...er-fc-1035617/ |
Sounds like you have quite a bit of research ahead of you.
The PFC is not going to be the limiting factor at that power level. The preparation of the block, along with matching the correct ancillary accessories (turbos, injectors, etc) will determine how much power a given a combination will make. If your ingredients dont work together, or there isnt enough experience in tuning it, then it will make 400-500hp for 2 weeks.. |
Hi that is crazy 701hp rx7 but when I do get around to building up the engine should I do a street port or mild bridge port for 500hp.
Thanks |
If you are planning on doing any tuning yourself make sure to factor in the price of a datalogit with the PFC before comparing cost with other ecu's.
|
What is a datalogit.
Thanks |
Originally Posted by ricardo.benin
(Post 11510512)
What is a datalogit.
Thanks I did and the first one was the one! Show us that you care. |
Ok so the datalogit is to tune the ecu easier on a laptop also how hard would it be to tune.
Thanks |
Originally Posted by ricardo.benin
(Post 11511906)
Ok so the datalogit is to tune the ecu easier on a laptop also how hard would it be to tune.
Thanks |
All times are GMT -5. The time now is 01:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands