0-5V source
 

I need a 0-5 volt source (boost). Is there any way of getting this from the fc edit box

Scott

Probably easier is to tap into the stock MAP sensor's output - it's a 5v output. Or, get an aftermarket boost sensor, like the GM 3 bar - also 5v out.

Dale

This has been working for me for some time now, and it doesnt have to feed off the MAP, which i am a bit tentative about using.

https://www.rx7club.com/power-fc-forum-47/5-volt-supply-voltage-extra-datalogit-inputs-423894/

Thanks. Thats looking good and will solve my other probs.

Scott

Where did you end up getting the sensors from.

Scott

Looking still. Found one place but at 90$ for the 100 psi still steep. Post back when I find 'em.

Tony

The sensors I have were purchased from an ebay seller named pyrojoe IIRC.

If you search on the innovative WB forum you will find details on the sensor and links.

I love these sensors, and use them for a myriad of different applications, I am even using one right now to test pump performance on a seadoo, very versatile and durable.

I wish I could get a hold of different variants on the design I really could use a 150 Psig sensor.

Tony do you have a link to the sensor you are referring to?

I dont seem to be able to find the sensors on ebay still ?