sr20? fd
i searched ohh 2 months ago id think.. and i found a sr20 powered swap done on a fd.. now i cant seem to find it.. ive searched and searched and its like it vanished.. the thread was a few years old i believe but does anyone have a link or info with pictures of the fd that has a sr20 nissan motor swapped in it??
|
Why do you want a sr20 in your fd? Most 240sx owners replace their factory ka24's with a sr20det because they come stock from the factory. But instead of keeping their ka24 and building it then boosting they'll end up with a lot more torque. And again no offense but swapping a sr20 in a rx-7 is kind of stupid. Why not swap a h22 in there and hit VTACK!?
|
A 3sgte would be a better option. Or just do a 2jz, the kits are available.
|
whoa whoa whoa guys.. im not wanting one im collecting pics on my cpu of different swaps i find in FD's that's all.. I found a sr20 once in a FD and i forgot to save the pics and now i cant find it. thats all. i dont want a sr in my FD i have different plans!
|
3rd Gen 3sgte will be real nice in the FD with 6spd Altezza tranny. But the SR20 will be cheaper. You basically make the same power out of both. The SR will be easy to get the only thing of the 3s swap is getting the tranny. Good luck if you go that route.
|
Originally Posted by wack0aznboi
(Post 8544325)
Why do you want a sr20 in your fd? Most 240sx owners replace their factory ka24's with a sr20det because they come stock from the factory. But instead of keeping their ka24 and building it then boosting they'll end up with a lot more torque. And again no offense but swapping a sr20 in a rx-7 is kind of stupid. Why not swap a h22 in there and hit VTACK!?
Originally Posted by jcurtis
(Post 8545252)
A 3sgte would be a better option. Or just do a 2jz, the kits are available.
I personally think that next to a rotary powerplant, an SR20 would be possibally the next best thing. Numbers like 350WHP are very practical, and VERY reachable(sp?). And it would be interesting to see the weight balance of an SR20 swap next to a 2JZ swap, and then in comparason (sp?) to stock. |
The sr20 FD that you speak about was GREY and had a c-west body kit on and was in a tuner magazine... I dont remember where I last saw this picture but it was the scanned magazine page if I remember correctly.
|
that sounds about right... anyone got that mag layin around and can scan those pages?
|
All times are GMT -5. The time now is 12:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands