|
Runs and drives and idles...still pretty f'ing ugly though. Need some finishing touches, wheels aero and a hood vent or new hood andddd :icon_tup:
|
3 Attachment(s)
|
Needs ore pics and updates for sure! Been into this swaps for awhile already made my parts needed swap list lol, interested in more info on the wiring/basics to run...Is this gonna be a CA smog legal swapped FC?
|
Originally Posted by danegerous
(Post 11321645)
The ECU pinout is as follows, supply 12volts+ to the 4 pins on the right, and ground the 2 highlighted pins on the left. This is just to get the motor running, if you wish to integrate it into your existing chassis wiring, you will need to do the appropriate translation. Mine is wired to a switch panel and a junction block where it receives the 12volts. I will be happy to diagram that if anyone is interested in doing so. |
Originally Posted by EverythingJZpowered
(Post 11325820)
disregard my post about the wiring if u could Post this up that would be awesome
Quick shot of this thing running and driving |
Originally Posted by danegerous
[IMG http://i18.photobucket.com/albums/b101/daneharding/photo2-5.jpg[/IMG]
http://i18.photobucket.com/albums/b1...g/photo1-8.jpg |
Haha no updates, sorry. Car has been in the shop getting cold pipe and other goodies fabricated. Hopefully some good news soon!
As for wiring into a stock fc, I'll still need to do some research. I don't have a stock car it's pretty much just going to me telling you where I would connect the 1jz to the factory harness in order to keep it stock as possible. |
Yeah thars all i really need. Ill prolly run aftermarket gauges or cluster or a switch board in the console...did u ever try to use the stock jz motor brackets? Ive seen some here with the stock brackets with longer motor mounts (like yours, just longer)
|
I did not, I suppose you can if you make a dog leg type extension. I just thought it was easier to cut some steel plates to fit the side of the motor and weld to it.
Having a weird issue where the car won't boost :( but aside everythings in place. I'm really thinking about getting a new chassis when this set up is dialed in and swap it over. Would be awesome to have in a street car. |
Buy cressida. Swap setup into cressida. Call it a day with a few brews....but seriously i love seeing jz`s into different chassis id say stick to it. Its something different
|
haha I'd do a soarer or s chassis if I was going to put it in anything different. I meant a new FC! This one was wrecked before, we didn't know it until after we bought it. Frame is bent, luckily in front of the strut towers.
|
1 Attachment(s)
|
2 Attachment(s)
Quick update...the fab work is finished up. Running 3'' I.D. Stainless downpipe w/ flex section.
I really need to do something about the top radiator hose. Aside from that eye sore, everything else looks pretty good. Attachment 683964 Attachment 683965 All fab work done by Martin at Parts Shop Max! |
hell yeah Dane! Everything is turning out proper. What did you do about relocating the p.s. res? I've gotta figure something out myself.
|
Originally Posted by turtle m3th
(Post 11362750)
hell yeah Dane! Everything is turning out proper. What did you do about relocating the p.s. res? I've gotta figure something out myself.
|
Looks good man
|
Originally Posted by EverythingJZpowered
(Post 11367259)
Looks good man
What's the status on your project? |
Is there any way the engine could have sat lower to clear the hood?
|
Originally Posted by GTR
(Post 11403399)
Is there any way the engine could have sat lower to clear the hood?
:stick: |
You're such a shyster with the pics...
|
1 Attachment(s)
She rips! First test run and the cops were called haha. Just been getting this thing ready for paint lately. Rolled my rears with a jack handle to hopefully clear the new wheels. Anyway I'll see if I can't spell the swap out a little simpler for those interested in doing it themselves. Here's a pic of the rears, it's my first time go easy haha.
Attachment 675340 |
1 Attachment(s)
|
4 Attachment(s)
Le updates
Got this ass blaster ready for paint Attachment 673910 Maaco did a gorgeous job...in the wrong color Attachment 673911 And then they resprayed it. Attachment 673912 My front wheels got here too Attachment 673913 Just waiting on the paint to cure to put the car back together, and some tires for the new footwork. |
1 Attachment(s)
|
awesome!im also in the works to start my swap, but with a 1.5jzgte lol only thing i must ask is the front radiator and intercooler, im a bit interested if that was fabricated or was it a kit?
|
| All times are GMT -5. The time now is 04:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands