RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Old School and Other Rotary (https://www.rx7club.com/old-school-other-rotary-63/)
-   -   ๑۩۞۩๑ WTB : Mazda R100 , RX2 , RX3 , Starlet Drag Car / Roller ๑۩۞۩๑ (https://www.rx7club.com/old-school-other-rotary-63/wtb-mazda-r100-rx2-rx3-starlet-drag-car-roller-607468/)

LUPE 12-21-06 04:05 PM

๑۩۞۩๑ WTB : Mazda R100 , RX2 , RX3 , Starlet Drag Car / Roller ๑۩۞۩๑
 
I'm looking to buy a Mazda R100, RX2, RX3 or a Starlet Drag Roller . I would possibly be interested in a turn-key car depending on price. Back-Halved car would be great.

Please, let me know if you know or have one for sale.

:)

rotarydude 12-21-06 05:27 PM

I am debating about sell an R100 that could be used for this, it has been raced in the past it is NOT tubbed it has a DANA 60 rear end I bought it this way supposedly has run low 10s in the past with a B-port 13B currently has no engine or trans.

I will have to find the pictures of it for them to be posted but what kind of price range are you talking about.

Dave

LUPE 12-21-06 05:43 PM


Originally Posted by rotarydude
I am debating about sell an R100 that could be used for this, it has been raced in the past it is NOT tubbed it has a DANA 60 rear end I bought it this way supposedly has run low 10s in the past with a B-port 13B currently has no engine or trans.

I will have to find the pictures of it for them to be posted but what kind of price range are you talking about.

Dave

Price depends on the car. I was hoping to by a roller to keep the price down but like I said, it just depends on the car.

Are you talking about your red one? I saw that someone offered you 10K, that is more than I'm willing to spend on a roller.

FYI: There is a complete 3/4 chassis R100 minus motor/trans that's selling for 7K. That's more than I can spend on a roller right now.

rotarydude 12-21-06 06:09 PM

no this is a blue i purchased a few years back it is a roller with a very nice body the only exception is the hood, it has a real R100 hood i just swapped it with my other blue one. Since this car is not a restoration candidate i never intended to use a real R100 hood on it rather a glass one.

BTW the red one is a complete running 10a car with 36k miles and is all original and even with the 10k offer it probably won't be sold until i am no longer around.

LUPE 12-21-06 06:11 PM


Originally Posted by rotarydude
no this is a blue i purchased a few years back it is a roller with a very nice body the only exception is the hood, it has a real R100 hood i just swapped it with my other blue one. Since this car is not a restoration candidate i never intended to use a real R100 hood on it rather a glass one.

BTW the red one is a complete running 10a car with 36k miles and is all original and even with the 10k offer it probably won't be sold until i am no longer around.

Alright, well................ Can you give me some more details on that R100 ? :ylsuper:

PM sent.

banzaitoyota 12-21-06 06:29 PM

I have an RX3 Roller, havent even picked it up yet. Its in NJ

LUPE 12-21-06 06:32 PM


Originally Posted by banzaitoyota
I have an RX3 Roller, havent even picked it up yet. Its in NJ


Is it setup for drag ?


I'm not looking for a stock car to completely build up.

France Hilton 12-21-06 06:58 PM

You're not selling your FD?

LUPE 12-21-06 07:01 PM


Originally Posted by France Hilton
You're not selling your FD?

My FD has been gone for over a month.

jaydun323 12-21-06 08:33 PM

so this is what you are doing with all the money you got from the blue beast huh? i cant wait to see a thread on a 9 and possibly a 8 second old school mazda good luck and keep the whole forum posted you know we all want to see the end result of this

LUPE 12-21-06 08:40 PM


Originally Posted by jaydun323
so this is what you are doing with all the money you got from the blue beast huh? i cant wait to see a thread on a 9 and possibly a 8 second old school mazda good luck and keep the whole forum posted you know we all want to see the end result of this

3/4 of the money went to paying off bills so that we could buy a home. The rest is for a toy/project.

My goal is to own something "Fast".

LUPE 12-22-06 12:03 PM

Anyone have any leads?

HDP 12-22-06 12:07 PM


Originally Posted by LUPE
Anyone have any leads?

herblenny (Phil) has a RX2 for sale...

LUPE 12-22-06 12:10 PM


Originally Posted by HDP
herblenny (Phil) has a RX2 for sale...

His is stock. I'm wanting something that's already setup for drag.

Thanks, though.

Herblenny 12-23-06 09:18 AM

lol! i sent you an pm before reading this...

Partsguy198 12-23-06 11:20 AM

Hey, I saw that you posted in Miami and Ft. Lauderdale Craiglist. You might have better luck under Orlando's Craiglist. There are a lot more rotary guys up there.

LUPE 12-23-06 02:39 PM


Originally Posted by Partsguy198
Hey, I saw that you posted in Miami and Ft. Lauderdale Craiglist. You might have better luck under Orlando's Craiglist. There are a lot more rotary guys up there.

Yes, I already put a ad up in Orlando.

Thanks, Though :)

KeloidJonesJr. 12-23-06 05:27 PM


Originally Posted by France Hilton
You're not selling your FD?

Read the sig?

jrrotor 12-24-06 01:54 AM

drag car
 
my friend has a full chassy miata.just the best on everything.all parts new.13b running nos jerico 4 speed and much more.........

HDP 12-24-06 05:44 AM


Originally Posted by eatmyclutch
Read the sig?

Read the previous posts?

LUPE 12-24-06 12:22 PM


Originally Posted by jrrotor
my friend has a full chassy miata.just the best on everything.all parts new.13b running nos jerico 4 speed and much more.........

I'm sure your buddy is asking way more than I can spend. Appreciate the reply, though.

Let me know if you know of anything else.

chuck8313BTSDS 12-24-06 04:24 PM

Found this on teamfc3s.org.


Awesome Pro-Street Mazda RX-7, rolling on Currie Enterprises 9-in rear end, 40-spline axles, 6.50:1 Richmond Gears, Full dragracing spool, Weld Aluma Stars (size 15x??), Goodyear slicks (size15x??), 14-pt roll cage, ready to run hard. every racing part on this car has 0 miles... project never finished...want this to go to a good home for a race enthusiast...
im new here... but i have great feedback on the mr2 forums
(mr2oc.com): jgdynamics
and
(clublexus.com): jgdynamics

contact me @ aim- trd93sw20t
or e-mail xpdition1@aol.com
if u would like to check out the car please contact me, thank you
car is located in SOUTHERN CALIFORNIA

as for the motor etc....
sorry, i forgot to mention, the car has no motor in it... true, it is unfinished, this is my brothers car, it has a clean title... very clean white/pearl paint, been garaged all its life. we were gonna drop in a 20b but with work and current careers, project has come to a hault... i will get more specific info on the whole vehicle.. as to who built the chassis, size slicks and wheels etc.

The asking price is 13k obo... come with ur offers... we are open minded and wouldnt mind selling this car to an enthusiest.

thank you for looking...

--jeriel


thank you..

http://img.photobucket.com/albums/v3...7/IMG_0040.jpg

http://img.photobucket.com/albums/v3...7/IMG_0019.jpg

LUPE 12-26-06 12:04 PM


Originally Posted by chuck8313BTSDS
Found this on teamfc3s.org.


Awesome Pro-Street Mazda RX-7, rolling on Currie Enterprises 9-in rear end, 40-spline axles, 6.50:1 Richmond Gears, Full dragracing spool, Weld Aluma Stars (size 15x??), Goodyear slicks (size15x??), 14-pt roll cage, ready to run hard. every racing part on this car has 0 miles... project never finished...want this to go to a good home for a race enthusiast...
im new here... but i have great feedback on the mr2 forums
(mr2oc.com): jgdynamics
and
(clublexus.com): jgdynamics

contact me @ aim- trd93sw20t
or e-mail xpdition1@aol.com
if u would like to check out the car please contact me, thank you
car is located in SOUTHERN CALIFORNIA

as for the motor etc....
sorry, i forgot to mention, the car has no motor in it... true, it is unfinished, this is my brothers car, it has a clean title... very clean white/pearl paint, been garaged all its life. we were gonna drop in a 20b but with work and current careers, project has come to a hault... i will get more specific info on the whole vehicle.. as to who built the chassis, size slicks and wheels etc.

The asking price is 13k obo... come with ur offers... we are open minded and wouldnt mind selling this car to an enthusiest.

thank you for looking...

--jeriel


thank you..

http://img.photobucket.com/albums/v3...7/IMG_0040.jpg

http://img.photobucket.com/albums/v3...7/IMG_0019.jpg



That's more than I can spend but I sent him an email anyways.

Thanks.

trainwreck517 12-26-06 07:09 PM

https://www.rx7club.com/old-school-other-rotary-63/fs-mazda-rx-2-s5-13b-turbo-1973-a-598256/

Not extactly what your looking for.. but could be a good starting point.

LUPE 12-26-06 07:57 PM


Originally Posted by trainwreck517
https://www.rx7club.com/showthread.php?t=598256

Not extactly what your looking for.. but could be a good starting point.

Yeah, I've seen your car and I think it's totally cool. If I bought it, noway in heck would I change the paint scheme you've got going. :icon_tup:

Not exactly what I'm looking for, though.


All times are GMT -5. The time now is 09:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands