working on a repu lsd kit
started working on a repu lsd kit since the one someone made in the past is no longer available i might be able to make more if there is alot of interest but i want test it first
https://cimg9.ibsrv.net/gimg/www.rx7...a654986047.jpg https://cimg2.ibsrv.net/gimg/www.rx7...88d964c17f.jpg |
More specific info about the kit please.
|
it would allow you to use an lsd torsen form a fd rx7 in a repu rear. you need a ring gear spacer and axle spacer also new bolts you will have to grind two notches in the alxe housing for the new bolts to clear like a fd rear end the pics are of the axle spacer first pic and ring gear spacer second pic
here is the info to the first kit that is nla http://www.mazdarepu.com/board/viewthread.php3?FID=1&TID=1908 |
Are the carrier bearings compatible? What are you doing about pinion depth when the crush sleeves are no longer available? How much shimming of the LSD is going to be required with your "ring gear spacer" ?
|
https://cimg6.ibsrv.net/gimg/www.rx7...065a2dfaaf.jpgring gear will be in the same place hope this helps.. bearing are the same
|
#ballin
|
Originally Posted by almoststockrepu
(Post 12118841)
Are the carrier bearings compatible? What are you doing about pinion depth when the crush sleeves are no longer available? How much shimming of the LSD is going to be required with your "ring gear spacer" ?
Glad to see someone else doing a kit Al! |
thanks brad its adam not al btw lol all good.. just following your lead someone had to remake this thanks for the tips!
|
subbed
|
I'm down
|
Nice work Adam! :) I think you could sell some of these on eBay too to recoup development time.
|
thanks brad i might just do that alot time invested indeed... anyway got it installed today took it for a drive and a couple burnouts so far so good nice and quiet
|
|
Are this still available?
|
Still interested... any updates?
|
I have sold a few kits looks like 1975 repu is getting the last one i have currently.. i will work on getting more done up soon
Originally Posted by motormanalpha
(Post 12226613)
Still interested... any updates?
|
I'm interested in a kit. I must have missed the memo that you had them available. Send me a PM when you have kits to sell.
|
Originally Posted by chuyler1
(Post 12226876)
I'm interested in a kit. I must have missed the memo that you had them available. Send me a PM when you have kits to sell.
|
repu spacer
I'll take one!! How Much???
|
I just recently installed this kit on my REPU and it's night and day difference. It also helps I put some really sticky tires on the truck as well! Rear grip for days now! :)
|
I have six spacers ready to go 220 shipped for the two spacers you will need to get your own bolts a few bucks at autozone i have part numbers email me awright84@verizon.net
|
Now I just need a repu....
|
4 left going quick
|
Originally Posted by xp882
(Post 12230782)
4 left going quick
|
Originally Posted by chuyler1
(Post 12230997)
I just shared the thread with the Facebook Group for you.
|
Repu lsd kit
Money Sent!!! Now we just need a rear disk brake adapter...hint, hint. LOL
|
Looks like they are all gone for now i will work on getting more out for you guys i didn’t expect anyone to want these.. also on that note marlon is working on a big brake kit for the repus stay tuned for that
|
Definitely interested in a brake kit, but that may hit the wallet harder than I can stomach right now.
|
Interested
Any of the kits still available?? I would like to purchase one.
thank you -Eddie |
I am also interested when availabile!
|
Getting some made this week check back with me monday sorry i didnt know so many were needed
|
Another batch ready to go please email me at awright84@verizon.net. Its alot easier for me that way thanks guys
|
Brake upgrade
Originally Posted by chuyler1
(Post 12231544)
Definitely interested in a brake kit, but that may hit the wallet harder than I can stomach right now.
The last time someone came up with a brake swap the basic kit was over $700 witch is probably why they didn't sell. By the way xp882 I got my LSD Kit. Thanks!!!! Looks Great. |
Originally Posted by spokanerxdude
(Post 12234754)
All we need are the adapters and the E-brake adapters as well as the list of calipers and rotors we need to complete the swap. Then we can buy parts as we can afford them. Dividing them up into Front & Rear kits would also lessen the burden on the wallet.
The last time someone came up with a brake swap the basic kit was over $700 witch is probably why they didn't sell. By the way xp882 I got my LSD Kit. Thanks!!!! Looks Great. |
Originally Posted by xp882
(Post 12118858)
https://cimg6.ibsrv.net/gimg/www.rx7...065a2dfaaf.jpgring gear will be in the same place hope this helps.. bearing are the same
|
Are there still any lsd kits available? I'll take one if so.
|
https://cimg8.ibsrv.net/gimg/www.rx7...fd774509d.jpegI do have some more kits ready to go please email me awright84@verizon.net
|
Originally Posted by xp882
(Post 12234991)
I do have some more kits ready to go please email me awright84@verizon.net
thanks tom |
All times are GMT -5. The time now is 03:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands