simple ignition schematic
This is for my race car. What I have is a 73 rx2 and I am putting a 13bt in it. On the ignition side, I am putting in a modified distributor from my 80 and I was wondering if someone had a simple schematic I could look at that had the key ignition, coils and starter. I need to rewire this thing, but I am getting confused trying to look at wiring diagrams, I want something that is simple so I can wire this puppy up and be done with it. Thanks guys.
|
Get a fog lights relay except the terminals for the lights will hook up to the (+) terminal of the coil. Be sure to use an in-line fuse. For the low voltage (controls the relay) can be a toggle switch OR a line coming from the ignition switch (energized when the key is ON). Usually, the non-bosch kit will give you a diagram.
Now for the igniters, 80 dizzy is a little blurry to me but it has a separate igniter so it should be the same as the 81+. the igniter should have a engraving in back --- that is (+) and (-) terminals. Run a wire from igniter (+) to coil (+). that applies to the (-) as well. |
Simple? How's this for yah?
https://www.rx7club.com/forum/attach...postid=2711509 Legend: 1 battery 2 ignition switch 3 Leading coils 4 Leading ignitors 5 Leading magnetic pickup inside distributor 6 Trailing coil 7 Trailing ignitor 8 Trailing magnetic pickup inside distributor |
My name is Steve, 76 RX4 twin turbo/K fuel injection/ 2nd gen suspenison. Thank You Jeffb20b
|
All times are GMT -5. The time now is 03:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands