Originally Posted by sen2two
(Post 11876844)
Ps. Get a cheap harbor freight band saw. They are always on sale for $200. Just put a good blade on it and it will do nicely for your intended purposes. You'll save hours on metal cutting. Plus, no sparks, loud cut off wheel, annoying compressor, ect.
|
Just look the complete thread and you made me change my mind about my shell... Dammm brother great work, passion and dedication. Keep it up! Did you know or can ask for me with your friends in Aguada or something where and who in PR have a shell for parts? I need a Floor from the front to the spare area.
Thanks in advance and Keep it up! |
Originally Posted by TypeRx
(Post 11897093)
Just look the complete thread and you made me change my mind about my shell... Dammm brother great work, passion and dedication. Keep it up! Did you know or can ask for me with your friends in Aguada or something where and who in PR have a shell for parts? I need a Floor from the front to the spare area.
Thanks in advance and Keep it up! |
1 Attachment(s)
Some updates not much but is getting there .
Attachment 626728 |
Is funny how my welds look but it penetrated . I didn't want to burn it
|
2 Attachment(s)
Reminder how the old inner fender looked ,
And mocking up the new inner fender . I just need to find a picture how old one was welded lol so I can make sure is good for installation the fender . Attachment 626726 Attachment 626727 |
1 Attachment(s)
The outside of what I welded today . Now that inside sheet metal is done I have to prep good before installing new outside piece . Not sure how to clean cavity area and seal rust and cavity good .
Attachment 626725 |
1 Attachment(s)
Looked bad huAttachment 626724
|
4 Attachment(s)
O I did this a couple weeks ago too . Came out good I think I grind too much .
Attachment 626720 Attachment 626721 Attachment 626722 Attachment 626723 |
1 Attachment(s)
|
Originally Posted by chino_rx3
(Post 11901375)
Thanks and I been a bit busy with my 1St gen but I jump on the rx3 here and there . Are you support for the floor good or is it gone ? Parts for our cars are super rare ,bro is easier to have someone built floor like a full chassis style and it will work good .
Well the shell I get was cut for drag racing as 3/4 chassis, I have the roll cage, chassis engineering suspension and differential, strange axles but I remove it from the shell to restore it due to the fact that now the laws here doesn't allow that kind of modifications for street use. If not I can build it with that. I already get a Floor from the front to the support frame where the bottom rear seats begins. Any chance you can contact or ask your buddies here in the island ill appreciate. Going to start a buil thread here soon. Not much to post but I'll do. Just collecting parts. |
Update on my Rx3
little update on my Rx3 , back from silk metal work done |
looking good brotha!! get that thing back together and come ride with us at DGRR
|
Originally Posted by 73rx313b
(Post 12387993)
looking good brotha!! get that thing back together and come ride with us at DGRR
|
Nice job! Way to stay with it!
|
Originally Posted by cfamilyfix
(Post 12391666)
Nice job! Way to stay with it!
|
Just bored lol
|
Little update
Well I had to built a little work area to keep my Rx3 parts together . And my daughter is working on fenders and my trunk lid , once done she will do my doors and nose . I just need to add power to my car port so I can finally get my compressor and welder hooked up . Some pictures
https://cimg8.ibsrv.net/gimg/www.rx7...d3bdc327d.jpeg https://cimg9.ibsrv.net/gimg/www.rx7...ba3fce461.jpeg https://cimg0.ibsrv.net/gimg/www.rx7...aac34c431.jpeg https://cimg1.ibsrv.net/gimg/www.rx7...ba799e062.jpeg https://cimg2.ibsrv.net/gimg/www.rx7...dcdad3bc5.jpeg https://cimg4.ibsrv.net/gimg/www.rx7...e72124c5b.jpeg https://cimg6.ibsrv.net/gimg/www.rx7...3a012a646.jpeg |
Rx3
Got me a rotisserie
|
Revealing my New engine for my Rx3, I’ll be posting more just a bit busy with home chores and getting my Rottiserie set up to start on my Rx-3. But Check out my new Engine
|
just read this whole thread! Your project has come a long way and is looking great. I'd be scared of doing that much metal work, but its worth the end result for sure. Keep up the good work, hopefully we will see the rest of that 20B come together soon.
|
Originally Posted by highnitro12187
(Post 12403965)
just read this whole thread! Your project has come a long way and is looking great. I'd be scared of doing that much metal work, but its worth the end result for sure. Keep up the good work, hopefully we will see the rest of that 20B come together soon.
|
https://cimg9.ibsrv.net/gimg/www.rx7...562e6e06d.jpeg
My little work area https://cimg0.ibsrv.net/gimg/www.rx7...fdaaa6529.jpeg My motivation https://cimg1.ibsrv.net/gimg/www.rx7...a5a64c2b5.jpeg How my car used to look when my buddy owned it https://cimg2.ibsrv.net/gimg/www.rx7...39f00a451.jpeg Got some Leaf springs finally https://cimg3.ibsrv.net/gimg/www.rx7...0801c196f.jpeg On route |
https://cimg5.ibsrv.net/gimg/www.rx7...e343a095e.jpeg
Got me a Oil Distribution Block I’m sure I’m going to need since engine is going to be tight against fire wall |
Nice - which one did you go with. I think you asked me on IG about mine.
|
All times are GMT -5. The time now is 08:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands