Yo tengo uno rojo del 78, estoy en Kissimmee, Solamente se de otro que esta aqui en Orlando que es de Billy Denizar el esposo de Olga Tanon. Dejame saber que piezas tienes para la venta...

hey Chino,hows the project coming along?

Ultimo que yo oi a Denizar no le queda ningunos. Tenia uno de cada color hace unos años pero ya no. Se que en Orlando hay various RX3 y creo que hay por lo menos un SP mas no contando los que Denizar tenia, pero de eso no estoy seguro.

You guys really need to work on your spelling. :lol:


Keith ;)

Keith..how is that SP coming along??? pic??
Marco

Slowly, I'll be going to lend a hand with some body work next weekend and should be painted in the near future hopefully. No new pics yet.


Keith ;)

Cool olga ta~on that's awsome . No no Tengo piezas para venta pero voy a necesitar soon ..

Not moving at all Putting in Engine on Rx8 today so once I get rx8 going is going to be my daily ,I start back on Rx3 .

GOOD LUCK .o spelling I always have sucked at it Spanish or English lmao.

Well I got my inner fenders back they are not like original look but they will do since is a one piece I'm good with that . I primed them good so when I get ready to put on they will hold up. I will scuff up again and probably put undercoating will see. I'm pretty much done with my rx8 so back to my rx3 .
Attachment 698440

Well today I took all my stuff out of car and finally going to start working on it slowly but slowly but surely lol.. I finally finish my RX8 got a few cosmetic work to do But I can live with that for now. Here are some pictures and man I messed up and didn't take care of harness and it clot all wet shit I think I may go with after market wiring harness.
Attachment 698313

Octopus lol
http://i496.photobucket.com/albums/r...IMAG0402-1.jpg
Attachment 698314
Attachment 698315
Love both Rear ends .

Attachment 698316

Got a side job to do this weekends ,party,and race track event so looks I'll be doing hour or so a day when I can good thing I get out at 3 pm got time to work on car here and their,

Well been busy and having real bad back pain got another apt for another shot in my back hopefully it helps more. Well started doing some little work on car. I'm going start with floor and I'm starting with trunk area and work my way to front , Friday I started on a area and hoping to finish that tomorrow so I can start another rust area in trunk ,
Attachment 691845
Attachment 691846
Attachment 691847

Attachment 691843
Attachment 691844

Attachment 691842

Still have to grind down and flush to tack it , I think I did pretty good for my 1st time doing a big piece .

Cleaned up area and sprayed it and left some areas where I got to cut and weld , got the best matco tool to strip under coating off it works really good you can see before and after .
Attachment 691696
Attachment 691697
Attachment 691698
Attachment 691699

Took seats out cleaned them up they look pretty good ,
Attachment 691563
Attachment 691564
Attachment 691565

coming along great!

^ thanks I just had another shot In my back so taking a few days off doing more Thursday or Friday . Getting excited finally doing more work on car. Getting epoxy Saturday so once I get pieces together weld time .:-)

Today I had a bit more time in my hands and tomorrow I may have more time but here is another shot of before and after, once all undercoating is off I have to resand all primer off use ospho then opoxy sealer then primer you will see my steps is more steps than I would like more is easier for me this way . I still have to lift car remove rear end and start stripping bottom end too but I'm doing bottom once lol
Attachment 690260
http://i496.photobucket.com/albums/r...IMAG0683-1.jpg

Top picture shows undercoating then bottom white paint with surface rust. I grinder down more of the rust off and undercoating before I primed it . Is pretty solid some minor areas but not to worried about it happy so far I thought it was worst,

More stripping undercoating and tar mats and floor looks so much better than I though made my day . You can see where rust took over in some area but I'm ok with it since I really thought it was going to be in a lot worst . Can't wait to strip it remove primed area sand it and respray with some real good stuff , I don't want nothing black in car . I decided to paint my car back to original color white . So floors may go grey or something for chassis in grey or white black looks so bla lol
Before I started
Attachment 690158
All removed
Attachment 690159
Passenger side the worst but. Manageable
Attachment 690160
Rear driver seat back corner bad but not as bad as I though
Attachment 690161
Attachment 690162

If im not mistaken, the GLC's trunk floor board (spare tire area) will fit a RX-3.

Thanks I think that will harder to find then weld some metal lol . Is mostly surface rust and some pin holes that I will fill in when I strip the bottom of the car that will be the fun part

Nice project you got.. How long has she been sitting?..