Help Mounting my 13b-re cosmo in a b series truck
K so I have a fc turboII with a 13b-re fully built and i recently spun out and the the wall at the track n bent my frame now rather then going fc again I want to go mazda pick up truck and i wanted to know how to mount my cosmo engine in the pick up being as there are so many on the market in my area I have the cosmo to fc adaptors too and I did a search but no exact answer to my situation I read somewhere I can use the fc crossmember but have no details I dunno maybe u fab gurus can give me some good help
|
pu rotary engine swap
Try mazdatrucking.com and search "rotary engine swap" that should get you started
|
Just put an early timing cover and the repu sump on it. Mission accomplished.
|
Originally Posted by .::evil inside::.
(Post 11909252)
Just put an early timing cover and the repu sump on it. Mission accomplished.
|
Originally Posted by turbofc7
(Post 11909304)
yea but I use the the turbo timing cover for oiling the turbo...
|
2 Attachment(s)
Originally Posted by Akagis_white_comet
(Post 11909350)
Front Cover, not timing cover. It is much simpler to use a GSL-SE front cover, they're much easier to find and mount into the chassis the same as the early 13Bs do. As for your turbo's oil drain, are you running a single or the Cosmo/FD twins? If you're running a single turbo, why not just use the REAR drain on the rear iron? If you are still running the twins, you might be able to make it work with a 12A Turbo front cover (and S4 OMP if not running premix) but it might be challenging to find one. Another option would be to modify a GSL-SE front cover with a bung for the oil drain. Just be sure to bolt it down to something solid before attempting to weld. Aaron Cake attempted welding up the OMP opening on a S4 front cover and it apparently didn't go too well in the manner of warping by 0.5mm or so.
|
Which is a s475 and if i run a gslse/12a front cover I would also have to Invest in a gslse oil pan and a front brace to weld on the trucks frame rail right? And still tap into the front cover right? I have 13b-re to fc mount adaptor kit from banzai so is there a way I can the truck to accept fc mounts? Just wondering
|
No point being stupid about semantics, Akagis. Timing cover/front cover is quite obviously the same thing. If you want to get fussy, the distributor/crank angle sensor drive gear which determines the ignition timing is behind this cover, so it's a timing cover.
|
Originally Posted by .::evil inside::.
(Post 11909649)
no point being stupid about semantics, akagis. Timing cover/front cover is quite obviously the same thing. If you want to get fussy, the distributor/crank angle sensor drive gear which determines the ignition timing is behind this cover, so it's a timing cover.
|
Originally Posted by .::evil inside::.
(Post 11909649)
No point being stupid about semantics, Akagis. Timing cover/front cover is quite obviously the same thing. If you want to get fussy, the distributor/crank angle sensor drive gear which determines the ignition timing is behind this cover, so it's a timing cover.
|
Originally Posted by .::evil inside::.
(Post 11909649)
No point being stupid about semantics, Akagis. Timing cover/front cover is quite obviously the same thing. If you want to get fussy, the distributor/crank angle sensor drive gear which determines the ignition timing is behind this cover, so it's a timing cover.
I have a Turbo2 engine in a b series p/u, I have a early "front cover" with a early oil pan, I had to flip the oil pan backwards in order to clear the original b series crossmember. |
Originally Posted by rotorholic
(Post 11909707)
Let's call it a oil pump cover instead or maybe a stationary gear cover? Its always been know as a front cover, wht try to make new names for it and confuse the newbies. I have a Turbo2 engine in a b series p/u, I have a early "front cover" with a early oil pan, I had to flip the oil pan backwards in order to clear the original b series crossmember.
|
Can anyone elaborate on that^^
|
Originally Posted by rotorholic
(Post 11909707)
Let's call it a oil pump cover instead or maybe a stationary gear cover? Its always been know as a front cover, wht try to make new names for it and confuse the newbies.
I have a Turbo2 engine in a b series p/u, I have a early "front cover" with a early oil pan, I had to flip the oil pan backwards in order to clear the original b series crossmember. |
F all that can someone shine some light on "putting the oil pan on backwards"? Is just me or does that sound a bit off to anyone but me?
|
Nobody is reinventing wheels. EVERYBODY knows the timing cover is the front cover. In Australia, everybody calls them timing covers, it's no big deal. I don't even know why we're talking about it. You could have just let it be. Aspergers much.
|
In order to flip the oil pan, you have to do two things
1. elongate and plug front and back corner bolt holes, as most of the bolt holes aligned perfectly, except those. 2. modify oil pick up tube. I used a 1987 RX7 pick up tube, had it shortened where the tube bends into the flange to clear the oil pan, and lenghtend to reach the oil properly. I also used a gsl-se front cover to make it work. First time I did this I just banged the oil pan and pick up tube, which resulted in oil leaks. Hope it helps! |
A non-gsl-se or any pre-86 front/timing cover will do fine.
|
All times are GMT -5. The time now is 06:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands