does anyone know what you need to make a rotay go kart
 

i need to know what i need to make a rotary go kart .if you know what i need please email me.

just put a 12A in the back of a Formula Vee

so all i need is a 12a how about the tran.

use a vw bug transaxle and a kennedy engineering adapter. sit in front of it and be ready to shit yourself

what is a kenndy adapter

ROFL no shit...just grab a cheap 12A, or if you feel a little suicidal a 13BT...strap yourself in and proceed to soil yourself...

You could catch a cheap plane flight down here to Tampa on Friday and ride with me to the 1/4 mile track to see one and talk to the guy that built it if you want to. It runs solid 12s with a stock ported 13b NA on the back of it. The guy built the wheelie bars on the back of it and has absolutley destroyed local fools in Z06 vettes. Not bad for 150 hp on a 1100 lb chassis.

-Lee

is that a stock ported 13b in a F-Vee?

A Kennedy adapter is a custom plate that allows you to bolt a rotary (or other engine), to a VW tranny. Their website is: http://www.kennedyeng.com.

how much does it cost?

$400. The information on the adapter is at this page: http://www.kennedyeng.com./mazda.htm.

thanks does anybody else have any ideas

goto http://www.wankel-ag.de/lcrkart_e.html its a 400cc rotary kart w/41hp! (look at the size of the engine!)

or if you don't give a toss about the life of the engine, just bolt the rear diff directly onto the gearbox (the bearings might not like it, but who cares?!?!) you could then put a seat above the diff, have the gearstick between your legs, and then try to figure out some way of steering the bastard!!! :D

thanks for the info is ythere a video of thay go kart?