RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   NW RX-7 Forum (https://www.rx7club.com/nw-rx-7-forum-33/)
-   -   WA Bridgeports. (https://www.rx7club.com/nw-rx-7-forum-33/wa-bridgeports-492756/)

Hyper4mance2k 12-21-05 03:08 AM

WA Bridgeports.
 
Is there anyon here with a bridgy? I'm still cought up in this internal debate. I want a car that will run low 12's high 11's and I know I can do it turbo, but I'm just so hung up on doing a bridgy. I'd like to hear one in real life so my hope is that there is one I might see one day. NE1 got one? Thing is that I've got a friend with a 10 second daily driven Mudstain, and I've got to atleast keep close to him. If I do it turbo he can say I needed boost, but N/A would be so much more of a slap in the face to his displacement. :ky:

eriksseven 12-21-05 04:57 AM

Too bad dDub is a n00000b and parted his car... ;) He had a little bridge going on.

Hyper4mance2k 12-21-05 05:01 AM

i know, how friggin lame. I bet the turbo bug bit him....

hoofhearted 12-21-05 08:18 AM

Damian has a 13b one in his green drag car; but don't think he's that fast.

hornbm 12-21-05 08:37 AM

mike of mspec rotary used to have a bridgy car called the lizard I think. Its the only bridgy ive actually seen run. Sounded SWEET though

RotorJoe 12-21-05 11:23 AM

/\
Was that in the grey FD with the body kit and the single turbo?
I stopped by and helped finish the electrical install and fired the car up with them. I forget the owners name but boy did the thing sound sweet.
I was then like, do me, do me!! and we almost pulled my motor to port for a half bridge.

Rx7WEEE had a half bridge also, but his was turbo.

evileagle 12-21-05 11:45 AM


Originally Posted by Hyper4mance2k
Is there anyon here with a bridgy? I'm still cought up in this internal debate. I want a car that will run low 12's high 11's and I know I can do it turbo, but I'm just so hung up on doing a bridgy. I'd like to hear one in real life so my hope is that there is one I might see one day. NE1 got one? Thing is that I've got a friend with a 10 second daily driven Mudstain, and I've got to atleast keep close to him. If I do it turbo he can say I needed boost, but N/A would be so much more of a slap in the face to his displacement. :ky:


Hah, "needed boost" is probably the dumbest thing I have ever heard. You need to whip his ass and tell him he "needed 4 extra liters of displacement"

Hyper4mance2k 12-21-05 01:07 PM

then he has the argument that I displace all 1.3L per revolution when he only does 1/4 of his 5.0 per rev.

Fumi 12-21-05 02:14 PM

if he says that then slap hi and say his mother is a hooker.
but seriously i would say do it and if your still not fast enough then boost it.

Hyper4mance2k 12-23-05 04:33 AM

yesss full bridge turbo!!!!

RX7WEEE 12-23-05 01:17 PM

I had a 1/2 bridge on my FD.

If you got time, wait a few weeks, the black FD is getting a 1/2 bridge, we could meet up sometime after she's broken in.

hornbm 12-23-05 03:45 PM


Originally Posted by RotorJoe
/\
Was that in the grey FD with the body kit and the single turbo?
I stopped by and helped finish the electrical install and fired the car up with them. I forget the owners name but boy did the thing sound sweet.
I was then like, do me, do me!! and we almost pulled my motor to port for a half bridge.

Rx7WEEE had a half bridge also, but his was turbo.


Nah, that was mikes own car. His first gen. The green and orange colored thing he had.


I dunno might buy another first gen one of these days and go port crazy with a downdraft weber on it. That'd be real fun.

Se7en85 12-23-05 03:57 PM

I don't mean to ask stupid questions but whats "half bridge-porting" and "Full bridge-porting" involve?

hornbm 12-23-05 04:58 PM


Originally Posted by Se7en85
I don't mean to ask stupid questions but whats "half bridge-porting" and "Full bridge-porting" involve?

check out this page at pineapple racings website. It shows the various kinds of porting and what they look like.

http://www.pineappleracing.com/ProdSvcs1.html

As for a half bridge thats when only the secondary ports have a bridge cut into them, in a full bridge, both the primary and the secondary ports have birdges cut into them.

ddub 12-24-05 12:45 AM


Originally Posted by eriksseven
Too bad dDub is a n00000b and parted his car... ;) He had a little bridge going on.

You're a n00b too! You're selling your car :p:

Only way I could make back 1/4 of what I put into my car was to part it honestly... very tough decision to make. Interests changed, didn't want the same things anymore. However, I shall return with another rx7 some day...

As far as bridgeports, they are easy and neat. Mine was an aux port bridge with "stage 2" extend porting everywhere else, s5 n/a.

Tanjo 12-29-05 06:58 PM

Hell, just go P-port. Either way, bridge or P-port, I dont think youll be gettinf close to the tens. You could get 300ish outta a P-port. Anyone know how much Judge Ito is getting outta his half bridge half p-port frankenstein?

hornbm 12-30-05 01:11 AM

^^^^^PSSSSH!

Jesus Padilla runs 9's on a all motor p port 13b in a full interior GSL-SE! You better freakin belive you can pull off tens on a p port!

Tanjo 12-30-05 11:51 AM

Nitro?

hornbm 12-30-05 12:19 PM

Ive never heard of anybody running nitro in a rotary. (something Ive often wondered about) Plus I know you cant run nitro in that class anyway.

Hyper4mance2k 12-30-05 09:12 PM

Nitromethane is very strong solvant, and I doubt that oil seals, would last very long on nitro.

Tanjo 12-30-05 09:38 PM

Im sorry, I was running out the door as I typed that, and meant to put N20, not Nitro. Nitro would only be for if he was running really high boost or really high compression. So, nitro is obviously not what I meant. Hes gotta be running a shitload of N20 to be putting a 2300 pound car into the nines. It was always my understanding that 300ish HP is about the max you can get out of an NA rotary. No?

hornbm 12-31-05 04:39 PM

NO n20 either. Its an all motor class!!! No power adders whatsoever! Theres been tons of articles in rxtuner about him. This class is totally about attention to detail.

CODE BLUE 2 01-01-06 09:04 PM

1 Attachment(s)
Mikeys old bridgeport green and orange car..

https://www.rx7club.com/attachment.p...d=147778&stc=1

hornbm 01-01-06 09:41 PM

^^^^ yeah thats mikes old car I was talking about. Its the only bridge port ive heard run in real life. Sounded SWEEET


All times are GMT -5. The time now is 11:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands