13b Firing order
 

86' FC3S RX7 -
Just want to make sure; the rotor closest to the radiator is L1/lower plug and
T1/ upper plug correct? and the rotor behind it L2/ lower plug and T2/ upper plug?

-Haynes manual has a 1/2 boxes for firing order (unspecific to engine orientation)

You got it.

yea i think thats right, My firing order is 1 2 1 2 1 2 Brap brap

Actually FC leading ignition is wasted spark, so they are both firing at the same time, all the time. :)

(L1+L2) T1, (L1+L2) T2, (L1+L2) T1, (L1+L2) T2, ....

Technically, you could have the leading wires backwards and it would not matter. :nod: It always made me twitch knowing that my leading was always sending a rogue spark right before or as the apex seal went over it. :P

~Tweak

Re:
 

Yah... so they were hooked up completely backwards assuming that the rear rotor(closest to fire wall) is "1" (L1/L2) instead of being "2" (L1/L2).

It ran and drove, but at 60mph it flat lined, and hesitated alot after 55mph especially in 4th and 5th gear. Thanks for your help.