Whats the best website to order Mazda parts online?
Im trying to order 93-95 Mazda RX7 OEM parts from a dealer here in AZ and im having difficulties ordering from the parts department, so would anyone suggest an online website that supports the RX7 forums and known to be active? i heard that most parts stored for the RX7 with Mazda are located in CA,TX,FL and PA
|
Punch in Ray Crowe under search..he knows his stuff.
|
sure i'll search him
|
so what would you recommend for me to refer to when it comes to part numbers? its easier to email the Crowe with the part number to inform me if the parts is available or not and its cost.
|
I use Amayama.com
Also, jimellismazdaparts.com or mazdaepc.com for part numbers. Or you can download the ECP software that i shared in a post here, just search for "Mazda EPC" |
so for example how many versions for the JDM? i see a lot of ISO files in the shared folder. i want the latest one that can retreive the Spirit R part numbers
|
Originally Posted by mazdarx-7
(Post 12119131)
so for example how many versions for the JDM? i see a lot of ISO files in the shared folder. i want the latest one that can retreive the Spirit R part numbers
|
Finding interior trim
What luck have people had finding interior parts for the RX7 FD3S? Are there any better replacement options for some of the aged door plastic trim pieces? Anyone got a website?
Thank you in advance - G |
i believe the interior door plastic trim are still sold by Mazda. I checked this info last week but they are very limited. give that a shot and go to any local dealer close to you who can order from the main Mazda warehouses in the US which are CA, TX, PA, FL
|
Originally Posted by mazdarx-7
(Post 12120889)
i believe the interior door plastic trim are still sold by Mazda. I checked this info last week but they are very limited. give that a shot and go to any local dealer close to you who can order from the main Mazda warehouses in the US which are CA, TX, PA, FL
- G |
they are running out of stock. for example the interior door panels are discontinued and no longer available. i was at the dealership last week just having fun checking for parts availability and was shocked that even the dash is not available. The worse scenario is to buy those parts second hand and i have seen them on sale once in a while when someone is turning his rx7 into a track car and don’t need those parts....check the classifieds section
|
Ive had pretty good luck with mazdatrix in the past.
|
Originally Posted by mazdarx-7
(Post 12120889)
i believe the interior door plastic trim are still sold by Mazda. I checked this info last week but they are very limited. give that a shot and go to any local dealer close to you who can order from the main Mazda warehouses in the US which are CA, TX, PA, FL
|
If you don't download a parts catalog, ask the dealer for diagrams. The parts guy is likely not familiar with FD's and the pictures are tough to decipher just going by someone's description. It will be much easier for both of you if you are at least referencing the same OEM catalog picture.
|
Originally Posted by skizifiziks
(Post 12131654)
If you don't download a parts catalog, ask the dealer for diagrams. The parts guy is likely not familiar with FD's and the pictures are tough to decipher just going by someone's description. It will be much easier for both of you if you are at least referencing the same OEM catalog picture.
Absolutely!! Parts guys normally can't even determine current models parts, let alone for a vehicle that's been out of production for 15ish years. Also, I learned in the Subaru world that even part numbers can be difficult for the run of the mill dealer to figure out. Combinations of a diagram and the correct part no should provide you with the proper part, USDM or JDM. |
Originally Posted by skizifiziks
(Post 12131653)
Pretty sure the map pocket is NLA unfortunately, last i checked there was one passenger grab handle/trim but it wasn't cheap.
|
We sell OEM mazda parts as well and are forum vendors. Contact us for anything your looking for!
|
Good info in here.
Does anyone know of another company (other than BubbleTech) reproducing and selling the passenger door handle for the FDs? |
Originally Posted by TravAZ
(Post 12138674)
Good info in here.
Does anyone know of another company (other than BubbleTech) reproducing and selling the passenger door handle for the FDs? |
Sakebomb is doing an aluminium one :) Bubbletech is plastic.
|
Bubble tech is the only one I've been referred to so far in regards to the map lid replacements. I spoke with Sakebomb a week or so ago when I was ordering various other parts and the aluminum map lid was never put into production and won't be because another company underbid them which made it no longer cost effective.
I've bought random other parts from rx7.com (arm rest) and have been browsing rx7store.net to pick up a mid pipe. |
This thread is precisely what I was looking for. Already have my door panels, however I have yet to find the map light/sunroof switch in black to replace my tan one.
|
If you race your Mazda, you have access to the entire parts system from Mazda and can order directly from Mazda at a heavily discounted rate. Cheaper than 99% of the vendors.
You can still get most parts (NEW) from Mazda, I have yet to find a part that I cannot get through Mazda parts program. |
All times are GMT -5. The time now is 10:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands