RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   spinning freely (https://www.rx7club.com/new-member-rx-7-technical-256/spinning-freely-814373/)

GST7 01-20-09 04:48 AM

spinning freely
 
my car wont start and it sounds like the motor is spinning freely
wat could it be????
is this motor done

Aaron Cake 01-20-09 09:26 AM

Could just be flooded.

To see if it's blown, see http://www.aaroncake.net/rx-7/blown.htm

Mazda_Gremlyn 01-21-09 11:59 PM

Could be the starter motor spinning but not turning the flywheel or broken teeth on the flywheel. Can you actually tell if the motor is turning?

GST7 01-23-09 05:19 PM

well i took out the bottom spark plugs and it dose fire....
but just wont start

Jase86 01-23-09 05:35 PM

if it sounds like it should start but just wont then check your flywheel if you've been bump startin then it went out then you wore out the teeth of it

Hit Redline 01-23-09 06:58 PM

Does it sound like this?

https://www.rx7club.com/1st-generation-specific-1979-1985-18/engine-died-freeway-wont-start-video-included-753395/

GST7 01-24-09 05:21 AM

yes it sounds just like it

Hit Redline 01-24-09 01:56 PM

^^^ Then you know its time to call the Rotary Shack for a rebuild.

trochoid 01-24-09 03:14 PM

If your engine sounds like the vid Hit Redline posted, then the solenoid isn't engaging the starter drive to the flywheel. Before you pull the starter for testing, run the ghetto compression test Aaron describes. In my sig line is a link to the online FSMs. Download and start reading, good luck.
.
.
.
.
.

GST7 01-24-09 07:51 PM

ok thanks for the help fellas....
ill post my updates and tell you
guys how every thing go's..


All times are GMT -5. The time now is 03:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands