RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   speed alert buzzer (https://www.rx7club.com/new-member-rx-7-technical-256/speed-alert-buzzer-869941/)

nicksta84 10-22-09 03:36 AM

speed alert buzzer
 
hello i have a 1987 rx7 series 4 turbo import and there is a a speed alert buzzer that sounds when above 107kmh and would like to remove it because the speed limit here in west aus is 110kmh

does anyone know the exact location of this buzzer and or what it looks like i have pulled part of the dash out to get a better look but to no avail .... please help

thanks

JDMinard 10-22-09 01:16 PM

On a rx7, i dont know what it looks like, but on my 89 tt supra it was some sort of litle gray/silver box/fuse behind the cluster. Maybe if you throw us a pic or two it would be helpful to point it out

funkjaw 10-22-09 02:58 PM

Speed alert buzzer? I didn't even know FCs had those. 107 kph is like 67 mph... that makes absolutely no sense for it to have a speed buzzer or governor at such a low speed. Then again I am in the states so it may be different for our FCs. Make sure it isn't your coolant or oil buzzer lol.

RotaryRocket88 10-22-09 05:58 PM

Jspec cars have a speed limiter. It can be disabled by removing a screw on the instrument cluster circuit board. There's apparently the number '180' printed on the board next to it.

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/j-spec-speed-limiter-217977/

JDMinard 10-22-09 11:09 PM

This is no limiter, but a speed alarm.
Jspec have this feature, if you run over ~105km/h... It goes ding ding and faster you go, more it "ding"

akbubba47 10-24-09 04:04 PM

that sucks! good luck finding it

black_7 10-24-09 06:42 PM

I can ask my boss lol, it was in my canadian FC

nicksta84 10-24-09 09:42 PM

thanks
 
thanks guys hope it works am waiting on motor to be rebuilt cant wait to be back on the road again cheers

nicksta84 07-21-11 12:24 AM

upon removing the screw beside the 1080 on the back of the cluster nothing has happened still beeps

GypsidangerFC 04-05-19 06:40 AM

I am still looking for the solution to this problem as well it drives me bonkers!

AE_Racer 04-05-19 07:47 AM

I found a post on an Australian forum that says to remove a screw marked "100k 120k", instead of the 180 listed above.

Maxwedge 04-05-19 10:15 AM

The OP (back in 2009) was in Canada. You guys have this buzzer problem here in the States? My goodness, the speed limit on the PA Turnpike is 70 and you can pass a State Trooper doing 79 without him noticing. A buzzer on from 67mph and up would be unbearable.

AE_Racer 04-05-19 11:27 AM

They are jdm imported cars.

GypsidangerFC 04-06-19 03:41 AM

my 86 fc is from japan that's why I have this problem


All times are GMT -5. The time now is 07:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands