rebuild????
 

should i rebuild my s5 tii. i just bought this off craigslist the lady "said" it was rebuilt. but they purchassed it from japan?? the motor has good compression. but i dont wanna go through all the work swapping the engine into my s4 na body then having to take it back out. What should i do open it up now and replace the soft seals for now or whats your oppion on this. I am open to oppions. and im in a debait bout wether to get soft seals or a turbo? ideas???

also what turbo should i run. Im looking to make 350 to 400 whp should i get a t3/t4 or a t4 turbo. i will make my own manifold at school so i can make things fit. i want the car to be reliable but yet have some balls let me know ideas.

what mods i have done or going to do
rtek 1.7 or safcII
clutch
turbo
s4 throttle body
custom dash with boost,fuel,afr,tack gauges
tii rear end
manuel boost controller
fmic or vmont havent decided
interor is already stripped so roll cage and racing seat
coil overs
bushing set
front bumper after market my front bumper is ripped
i have greddy 3 inch exhuast all the way back
short throw shifter
proubly alot of stuff i forgot.
let me know what you think i should do on the engine

A j-spec engine is a junkyard engine from Japan. Typically they have low mileage. But there's no guarantee that they do.

Perform a compression test to get a general idea about the condition of the engine internally. If the engine is in good shape, then you don't really need to build it for the 350HP power level. At 400HP, I'd say to build it with a street port.

For 350HP to 400HP, get use a GT35R or similar sized turbo (60-1, etc.). 35R would be my choice. Use the large T3 hot side (1.06) or the available T4 hot side (I think from A-spec, I forget the exact size).

RTek or S-AFC won't do it. You need a full standalone.

would a rtek 2.x work or what do you mean by stand alone i dont want to put thousands into the car nor do i have thousands to put into the car. i just want some decient power enouph to beat mustangs hondas just the stupid cars people mod that you see ever day. would a this turbo work or what do you think http://store.max-redline.com/servlet...r-AR.60/Detail. you can here six good hard swoosh sounds coming from the rotors i know its not a compression test but the tranny is off of the car. but i did find a NICE hpi copper mixed racing clutch and a exedy pressur plate. would this support my power or do i need a new clutch and pressure plate im resurvacing the fly wheel

a stand alone is a complete engine management system like haltech, microtech, etc. if u don't have or want to put thousands of dollars in it then forget the 350 to 400 hp goal.

ok i knew what stand alon was i just wanted to know some name brands i could look for sale on the forums here. but all the info helps

yah, there really isn't an inexpensive way to do what you want. Stick with small gains if you want to keep a minimal budget as you should expect probably an extra $3-4K with standalone and tuning on top of whatever turbo and extra's you buy...

yeah i think im going to get my car going and stick with the small gains for now then stand alone and a kick ass fc. thanks for all your help guys what do you think bout going rtek 1.7 or a safc. and what hp am i looking at for a turbo fmic or vmont and some type of little tunning

bump.

question how much hp will rtec 1.7 support or should i go safc2??

Why not go with the newer RTek 2.0?

thats true. let me see

Or even better, ditch all the old wiring and stock ECU legacy junk and got with a proper full standalone. I just realized you are looking at 350HP - 400HP, which is well in the territory where a standalone is required to keep things reliable.

ok i got a rtek 2.1 a rajay turbo which i believe is a 1. something ar. thinking bout going vmount because things are already tore apart. still in debate wether to tear down and freshen up at least the soft seals and street port it but this will be my first rotary engine to put back together i have tore a few n/a's down. is it possible to make my own block off plates. or is it just better to buy them. also going dual pully. do i have to change my hood with a vmount. i love v mounts because i like the idea of people not know i have a turbo till i pull up to the line and they here the bov go off