re: exhaust sleeves
hi i just need a bit of info.
im currently doing a 13b cosmo engine into my s3 rx7. the engine is from a front cut (done about 21000km)and i have started and let the engine run and all apears realy good. now i want to ditch the twins and add a single turbo. after looking at the exaust ports they seem realy small compared to a 13brew. i was just wondering if a s5 highflowed turbo would still spool up well with the decreased flow from these ports and does it warant pulling down the engine to change the exaust sleeves. and if i was to add a bigger turbo later on would it still boost up ok. |
There is no real gain in doing the 13b-re over a s5 turbo conversion if you are not going to pull the engine apart and swap exhaust sleeves and port the intakes (they are really small inside the engine).
|
All times are GMT -5. The time now is 10:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands