|
Finally bought a FD (with pics)
Bought a FD today. 10k on rebuilt street port engine, single turbo, power FC commander, Meth/Water injection.
http://i291.photobucket.com/albums/l...ps2f0e6307.jpg http://i291.photobucket.com/albums/l...psc8908d39.jpg http://i291.photobucket.com/albums/l...ps8ca4766c.jpg http://i291.photobucket.com/albums/l...pse2fa8231.jpg |
That girl seems happy!
|
Welcome and congrats on the new toy!
|
Still has working AC, Power Steering, and cruise control
|
Congratulations.
Looks like it might have been sitting a while. Now get that Factory Service Manual and study up. Great time to go through it for a baseline for maintenance and learn about the car in the process. Change out all the fluids, some good fuel system cleaner, fuel filter, new plugs etc. And you can still tear-up the roads in between. I'm with the others on the wheels. |
Taking it down to Tri-Point (a rotary shop) today to have everything checked out.
|
Originally Posted by Whitetiger777
(Post 11333364)
Taking it down to Tri-Point (a rotary shop) today to have everything checked out.
|
True, but its for piece of mind to have a rotary specialist go over the car and call attention to anything that might become a problem. Especially when the car was modded by someone else.
|
If it starts up fine , has good oil pressure, runs without overheating, smoking, or hesitating, everything should be good.
The main concern would be the cars tune, you'll want to know its running the right air/fuel ratio and not running lean. Rotary >Pistons |
Well, they found 5th gear syncro is going out, engine compression was 110, bump stops are dead, rear pillow mounds are going dead, they found a oil level sensor wire disconnected, fixed the display on the power FC, found a hose popped off in the turbo system and ordered up a AEM Failsafe gauge. All in all, I have a more sound mind when I drive it not wondering if the engine is going to nuke.
|
Originally Posted by Whitetiger777
(Post 11333863)
Well, they found 5th gear syncro is going out, engine compression was 110, bump stops are dead, rear pillow mounds are going dead, they found a oil level sensor wire disconnected, fixed the display on the power FC, found a hose popped off in the turbo system and ordered up a AEM Failsafe gauge. All in all, I have a more sound mind when I drive it not wondering if the engine is going to nuke.
Originally Posted by Whitetiger777
(Post 11333865)
Think I'm going to remove the meth injection though. Don't think I'll ever use it.
You don't HAVE to run meth. I run a simple (distilled) water-only boost activated system on my car. Car runs cooler, reduces knock values and I don't worry about carbon even though I pre-mix AND run the stock OMP. I don't tune to it, it's just for reliability/safety. My .02, I'll shut up now. Have fun with the car. That's good compression and looks like a solid car. |
Given I believe the car is tuned with it I don't think I'll pull the meth off until I get it on a dyno and see whats going on. The system seems to be giving errors though and I believe it's effecting my everyday performance. We'll see what happens though.
Just out of curiosity how much did it cost you to fix your 5th gear? |
Originally Posted by Whitetiger777
(Post 11334382)
...Just out of curiosity how much did it cost you to fix your 5th gear?
THIS IS NOT MY WRITE UP. I simply saved this for other people so DON'T contact me about the tools ^From the stickys. Mine was broken almost exactly like that picture. |
Originally Posted by Sgtblue
(Post 11334237)
5th Gear synchro in the early production models was a known weakness. Supposedly MAZDA ungraded it in subsequent models with a stiffer shift-select spindle. I dealt with it years ago myself. Pillowballs are also common...and noisey. IMHO, if you replace any, replace them all. I think there are six in the rear suspension.
I realize the car is new to you and you've got a learning curve and other things to deal with. But before removing it, I recommend you take some time and read thru the stickys in the Auxillary Injection Section. Howard Coleman, a big brain here, wrote most of them. Just be sure to understand it's advantages. You don't HAVE to run meth. I run a simple (distilled) water-only boost activated system on my car. Car runs cooler, reduces knock values and I don't worry about carbon even though I pre-mix AND run the stock OMP. I don't tune to it, it's just for reliability/safety. My .02, I'll shut up now. Have fun with the car. That's good compression and looks like a solid car. |
^FWIW....stock tire size for the OEM wheel was 225 50 16. For years I ran 245 45 16...a wider tire that fit on the stock 8" wheel fine and kept the speedometer correct. Unfortunately no one is making 245 45 16 street tires anymore. Obsolete size that's only offered in 'R' compounds. So you have to go back to the narrower 225s or move to a larger 17" or 18" wheel.
|
About 127k on the odometer, and I just bought some stock rims with Dunlop tires on them. Unfortunately the tires are 12 years old so apparently I can't use them
|
First Mod done. AEM AF/Boost Failsafe Gauge
|
Nice!! Super clean too! Congratualtions!
|
Sweet ride! its nice to find cars that were properly modded from yesteryear, the wheels are period correct... lol but i love it overall. Good find and good luck!
|
Congrats that is a beauty. Love that color engine bay looks great. May you enjoy for many many years!!!
-Scoco Connecticut |
sweet.
i'm not usually into sporty mcsport two door coupes (wags, sedans etc more my taste) but this shape is the epitome (and pinnacle) of mazda styling. swooping curves, big hips, ideal size & weight... pure mazda sports car style. i love 'em. :nod: i reckon as the years pass the fd's 'classic mazda' status will only grow and they'll become even more highly sought after. now, otoh, the wheels... |
Originally Posted by Whitetiger777
(Post 11333364)
Taking it down to Tri-Point (a rotary shop) today to have everything checked out.
Rotary Power - Harbor Gateway - Gardena, CA |
Originally Posted by Mr rx-7 tt
(Post 11347059)
Go to Rotary Power instead. He is honest and knows far more.
Rotary Power - Harbor Gateway - Gardena, CA |
Looks pretty clean! nice find
|
Nice FD. Congrats
|
Congratulations on picking up a very nice looking FD!
|
congrats now just get some nice wheels
|
very nice wish i could afford one
|
Thats definitely one of the cleanest stock FD's I've seen in awhle.
Keep her going! |
I wouldn't necessarily call it stock, but yes the body is in great condition. I do plan on doing the 99 conversion on the exterior.
|
Originally Posted by s2k_2nv
(Post 11351360)
congrats now just get some nice wheels
|
Nice buy! Now i just need to find one that clean.... minus the wheels! :-)
Good thing you bought OEM ones already for it! |
Ya, but the tires are made in 01, so I'm going to have to wait to put them on. I just had to drop a lot of money on the transmission.
|
still got them wheels by chance?
|
Yes I do.
|
New mods just in:
Rebuilt Transmission ACT Heavy Duty Clutch |
Grats man looks awesome!
|
Man nice ride. Did you get it for a good price.? Already souped up
|
I think I got a good price, not a smoking good price, but a good price. The car was already modded when I got it, but I have a few changes I'll be making.
|
That's a clean RX-7 man take care of her.
|
Pretty clean. I already had to rebuilt the trans and replace the clutch. Next on the agenda is the pillow bushings, then everything else is fun stuff.
|
Nice looks pretty clean ive been looking for a fd for awhile not luck so far ):
|
Ya, it took me about 3 months or so. There was a beautiful silver touring in VA on the for sale section of these forums.
|
Awesome.
|
dam, the car looks soooo clean, wish the same can be said for cars in my area
|
Just keep looking. Like I said I saw 3 months of FD's that were beat up in some way shape or form. By the time I came across this one I was so tired of looking at beat up cars I bought it.
|
Congrats on the purchase, nice looking ride!
|
Nice FD. Not a fan of chrome, but I am liking those wheels.
|
Yup, got it off a dealer lot.
|
Yup, Montego Blue
|
| All times are GMT -5. The time now is 12:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands