FC Oil Pressure Sender Location???
I can't seem to locate the Oil Pressure sensor or sending unit.....where is it hiding? My oil pressure gauge doesn't move when I start the car
|
It's the large round thing to the right of and below the dipstick (if looking at the engine from the drivers fender). Single spade connector.
|
1 Attachment(s)
That guy?
|
1 Attachment(s)
Originally Posted by WondrousBread
(Post 12212319)
It's the large round thing to the right of and below the dipstick (if looking at the engine from the drivers fender). Single spade connector.
|
Hard to tell from that picture what you are referring to (no offense). Here are two I took:
Wide shot, sender highlighted Close up: Forgive the poor lighting, it's almost 1:00 AM here and it's raining heavily. |
Just put your hand on your oil filter and follow it down, you eventually feel whats about the size of a tennis ball, thats your sender
Honestly it looks like a small metallic boob with the nipple being where the wire hooks up |
Originally Posted by lduley
(Post 12212433)
Just put your hand on your oil filter and follow it down, you eventually feel whats about the size of a tennis ball, thats your sender
Honestly it looks like a small metallic boob with the nipple being where the wire hooks up
Originally Posted by WondrousBread
(Post 12212349)
Hard to tell from that picture what you are referring to (no offense). Here are two I took:
Wide shot, sender highlighted Close up: Forgive the poor lighting, it's almost 1:00 AM here and it's raining heavily. |
Scratch that. At 800Rpm I'm sitting at 20psi
|
20 at idle and up to 80 full throttle is ok.
|
check the FSM, can be found at foxed.ca. oil pressure is measured around 3k+ rpm. i think stock pressure is around 60 psi @ 3k.
|
All times are GMT -5. The time now is 01:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands