RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   blown motor (https://www.rx7club.com/new-member-rx-7-technical-256/blown-motor-786125/)

foxracr 09-11-08 12:30 AM

blown motor
 
my friend just blew his motor on his 87 and was curious how much it is to replace or if it would just be cheaper to rebuild?

Rx7_Nut13B 09-12-08 01:00 PM

You can find a used JDM motor for about 800-1000, Could be low mileage but no garentee

Or

You can buy a Master Rebuild kit 800ish and a rebuild video 40ish and learn somethings that you may not have known before. But the problem is if you have a blown motor you will need at least a rotor housing and a rotor.

I would go with the rebuild. Anyone can rebuild these engines if you take your time.

Eclipsed4ever 09-13-08 01:39 PM

How hard are they atually to rebuild with the right parts?

Is there a big difference in performance rebuild stuff and standard rebuild stuff?

pgiller 09-14-08 07:34 PM

The cheapest jdm engine i found was 1599 and it came with everything to swap a na to a turbo. is that to much?

Turbo II Rotor 09-14-08 07:46 PM

$1600 for the engine, wiring harness, computer, clutch, pressure plate, flywheel, slave cylinder, drive shaft, rear end and axles is a good deal.


All times are GMT -5. The time now is 06:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands