13b turbo in a b2600 4X4
hey everyone, 1st post here, I have done alot of research and have found little info on this swap. what I could not find is if anyone has acually done this swap? I have a 1991 b2600i 4X4 with a cracked head and i wanted to replace the engine with something with a little more power (13b) and keep the original trans/trasfer. If anyone has some input or info i would appreciate it. (buying the engine one week from today if everything goes as planned).
Thanks, Jesse |
Shoot an email to Dan Atkins at Atkins rotary (.com) and he will be able to answer alot of your questions. I know there are is a site that sells an engine mount adapter for a 13B into B series trucks. Some other things available also, just cant remember the site. He will be able to point you in the right direction.
|
IF you get the info,it would be Great if you could Post it up on the forum.I was "dreaming" about the same sort of thing.I actually had the Truck,and the engine at the same time,But I was gonna use the truck for Daily driving(4 banger)and the Engine(TII) for my car!
|
you need a 79 sa rx7 bell housing, go to mazdatruckin.com it is the best site ive found for info on that swap
|
yeah there are vids on you tube of rotary b-series trucks, and yes the trans has to be changed, the starter for a rotary is mounted in the opposite position as it is for the pickup, i considered this project when i was rotorless and wrecked my b2200, but i have a project FC now
|
pretty popular swap in Puerto Rico.
|
thanks for the replies. From what i've read the trans in my b2600 is the same as the 89-91 rx7 tranny, and to do the swap all i would have to do is replace the bell housing, fab up the mounts and fab the exhaust. I didn't know about the starter being on opposite sides? where you comparing it to a b2200? any other info would be greatly appreiciated.
(here is a pic of my truck that will be going 13bt, i can't figure out how to shrink the pic down so just copy and paste the link.) http://www.nopistons.com/forums/B260...ed#entry923256 |
yes i was comparing it to a b2200 with a carb'd 4cyl.
isn't the b2600 a small v6, if you are keeping ur existing tranny then u are keeping it 4x4? |
Yes, i'm gonna try keeping the stock drivetrain other than the rotary. 4x4 will still work.
|
Originally Posted by rotorius_13b
(Post 9309528)
you need a 79 sa rx7 bell housing, go to mazdatruckin.com it is the best site ive found for info on that swap
The SA RX-7 and all N/A RX-7s used a smooth case transmission that does NOT have a seperate bell housing. He will need a Turbo 2 bell housing.
Originally Posted by trblsmeFC
(Post 9311465)
yes i was comparing it to a b2200 with a carb'd 4cyl.
isn't the b2600 a small v6, if you are keeping ur existing tranny then u are keeping it 4x4? I have one of these trucks sitting in my back yard. In addition to the engine swap. Use the Turbo2's differential in the rear end of the truck and an N/A differential in the front. (Not ring and pinion. the 4.44:1 that's stock you'll need for torque. Use the differential for Limited slip/locking capability in the mud.) |
Hey, I picked up my engine, trans, and wiring yesterday out of a 90 rx7. right now i've got the old engine out of my truck and the new engine on it's way in. everything looks like the engine will slide in with a few mods. One thing that i didn't think i would have to do is move the trans up about an inch and a half, this isn't for sure but i think the intake is going to hit the fire wall. no big deal though, the drive shafts have a slip yoke so i think i may be able to get away with sloting or redrilling the mounts. if anyone has any experience and wants to chime in i would be happy to here from you.
Thanks |
if there is any one wanting to do this swap still a have done it and kept all the truck running gear and didn't have to drop the front sus. also know what part need to be swaped and what years the right parts have to come out of
|
This swap would be pretty sweet to see.
|
Reply
Originally Posted by swap it
(Post 11398467)
if there is any one wanting to do this swap still a have done it and kept all the truck running gear and didn't have to drop the front sus. also know what part need to be swaped and what years the right parts have to come out of
Email is marcusmazda@windowslive.com cheers |
Badass
Originally Posted by swap it
(Post 11398467)
if there is any one wanting to do this swap still a have done it and kept all the truck running gear and didn't have to drop the front sus. also know what part need to be swaped and what years the right parts have to come out of
Bro please email me majmarkmiranda@gmail.com I'm currently gonna do a swap on a 1992 b2600i 4x4 and wanna put a 13b in it maybe a turbo one from my research all I need is a bell housing wiring harness engine and a 13bll from a 89 to 91 rx7 please confirm and tell me what u did |
welcome to the board. :)
i wouldn't hold my breath. his last activity (in his profile) was about 8 years ago. as far as your list goes, you may have to get creative sourcing those items. |
All times are GMT -5. The time now is 11:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands