well my car idles funny also but like max saying it surges alot. Stays below 1k but drops to about 500 a lot when sitting at light and such. There is a check engine light but it goes out when I press on the gas

Hey anyone here going on the Cape Cod run?? Want to caravan down?

sounds like a bad idle air control valve. check power to the valve and signal back to ecu. it might have crapped out on u.

Does your engine rev up to about 2000-2500 on startup when its cold? If not, then you have either a bad BACV or a bad transistor in the ECU that controls the BACV.

One way to test this is to take the BACV off the engine, turn it over so you can see the little plunger inside and turn the key to the ON Position and you should see the plunger open and the BACV should vibrate since the ECU runs the BACV around around 180hz or something like that.

Here is a thread I started a while back when I was putting my BACV back on after having it off for abot 4-5 years :)
https://www.rx7club.com/showthread.p...ight=BAC+Valve

You deal with GM parts to often :) Us rotary gurus don't call it that! Bypass Air Control Valve! :lol2:

yup it revs right up and stays there until it warms up. I know it looks like apiece of the cat was cut I think was part of the OBD II a little pipe coming out of the side of it I was thinking that had something to do with the check engine light

We don't have OBD2 or 1.

That little pipe is for the air pump.

Hey, is there anyone by manchester/hooksett/candia that is willing to sell those flash-to-pass lenses right below the headlights? Mine are busted at the brackets and it doesnt look like they will be put on anytime soon :P

It shouldn't stay at around 2000rpm. I should only rev up ther for about 3-5 seconds and then slowly drop to around 1500 and the thermowax takes over. What RPM does the engine reach when cold? 1500?

Sounds like a vacuum leak , stuck TB plate, or bad thermowax valve.

Hey guys no worries I figured out my electrical prob lol it was a damn fuse. but anyways no worries on the exhaust leak either cause I am getting a new cat and a 3" cat back. and I pickup up a set of 17X8 and 17X9 Rogamasters with a +45 offset and was wondering if anyone has any 1" spacers? and the front end I got is an RE Amemiya bumper with projector head lights.

Hey guys I heard about a cape cod run a few days back and I was wondering. I went to a 240 swap meet on saturday and got to talking to a few of them and told them about the cape cod run and they all liked the idea. So I shot it if they would be willing to try and set up a NE RX7/240 meet and do a cape cod run maybe next season? They all LOVED they idea. The NE 240 forums are also sponsored by synaptic3 so that would be awesome let me know if you like the idea?

Look what dropped in at our FBO today!!

Triple H came off it :)

http://www.midnightgray.net/images/wwplane.jpg

Did you get put in a fake headlock?

lol



hooray my LMA-3 came back in from repairs at innovate yeasterday, time to buy a few sets of plugs and crank up the boost (finnnnnnnnnnnnnnnnnnnnnnnnnaalllllyy)

Here are some better pictures of it. They are high resolution big pics so dialup, you may want to download them first.

http://www.midnightgray.net/images/wwchallenger1.jpg
http://www.midnightgray.net/images/wwchallenger2.jpg
http://www.midnightgray.net/images/wwchallenger3.jpg
http://www.midnightgray.net/images/wwchallenger4.jpg
http://www.midnightgray.net/images/wwchallenger5.jpg

haha nope. Im not a big fan of the WW series, I actually never watch it but it was kinda exciting having them come in. Triple H is a awsome guy, real nice, Mr. can kill me with one punch.

hey i live in jaffrey nh right below keene, i work in keene at leons j&l autobody and i have an 88 rx7:)

I live in Greenfield. Close to Jaffery :) 88 Rx7 my self

well hot damn, i HAVE an 88 RX-7 as well, (justin you should know!). I keep it in Troy. Hey pistonsdowhat, rodney still workin in the body shop over there at J&L? I just took a spin through Keene last sunday, I forgot how much I hate keene!

Welcome to our own small piece of the "As the Rotor Turns".

Ya I don't like jaffery, keene or ringe. I lived in Jaffery when I was about 7 years old. Those towns don't seem to have much of anything good. The roads are horrible and ringe, well I never knew Sears would buy a shack and call it a store.

lol that is great and the only good about keene is the college other that that eh. I put and exhaust on my car and wow is it loud lol. I am jw I am going to be doing the 13bt swap and does anyone on here want a 13b, tranny, ecu, wiring harness, and I have a welded diff going up for grabs this is all out of a 90 FC just let me know or send me a PM

i need a TII tranny really really bad, mines about to shit the bed. also a new clutch, i dont know why i put a solid-hub disc in, hardly streetable and noisy.

you two huh? my os gilkin twinplate with unsprung hubs has raged hell on my turbo tranny as well

i think dom_c has one unless he sold it to a local buddy

-jacob

justin umm dont remember but ok. no rodney dosnt work at leons any more. i hate keene to sadly :lol2:

yeah jaffrey and everywhere around here sucks. so i that is why i am heading of to florida to open my own body shop.

What the hell, is it just Dave and I out on the west side of the state?

lol well if i had the cash to get my 13bt I would send that tranny out to you but still need a bit more so I can pull mine all out.


the diff on these cars suck to drop out i hate it lol

He is talking about me :). all I remember is a very nice looking T2 :)

i am on the west side of the state i am like 20 mins to vermont

does anyone in here have some spare used coils or stock spring they are willing to sell? My passenger side front tire is now rubbing on springs because they guy how owned it before me decided to cut the springs yes that is bad but he left the excess spring in on the strut so there is loose spring just floating around and it is destroying the inner wall on my tire... :(

Well, if I ever get mine back from the shop, I'll swing down to the Keene/Jaffrey area. I need to visit Autex anyway, my awesome auto-belts need a recall fixin.

you need to quit being a skirt hank. i have just about everything to turbo your na.

Still haven't received the bushings, D. I could have biked down to TN and back by now. Or whittled my own out of glass.

Parting out my FC... Things im selling right now:

Pair of Corbeau Forza seats (black) with brackets, these
seats are 5 months old $400

Cusco front strut bar $75

Cusco tri-brace with Corksport rear strut bar $100

Apexi S-AFCII in silver $200

Greddy turbo-timer in black $60

Carbon Fiber radio surround with (3) 2 1/16 gauge holes $100

Carbon Fiber radiator panel $75

ShineAuto TII hood scoop $75

MINT 89-91 tailights (pair) $200

Wings West fiberglass wing (from Mazdatrix) $75

17" Konig rims with 215/45/17 and 225/45/17 Fuzion ZRi tires.
Good tread left, used only two summers $625

christ still nothing hank? get on that shit and make some calls. I'd be pissed!

Why are you parting it out? Are you trying to become financially secure?

if you still have the seats and tower braces in 2 weeks I would take those

Who to send injectors to?
 

I'd like to get my fuel injectors cleaned. Do you know if anyone in the Keene area who can do this?

FYI guys that green FB I kept asking about is now for sale on old turnnpike road all that is on the signs is a phone number.

You didn't crack up your car did you? why you parting it out? Was such a nice lookin car.

Your most likely going to have to send them out. Try searching the forum for injector cleaning and the like......

I sent mine to RC engineering in cali. There are other places closer though and cheaper. Mine where flow bench tested, cleaned, and painted :) New pintle caps as well

Where's everyone at guys? :( I usually drive my black TII FC about 4 times a week and i've yet to see anyone in manchester with an RX :( I saw a red TII FC in front of west highschool a couple weeks ago while crossing the street, very cool, but i haven't seen anything yet! Please show me a sign! :)

I am in the same boat! I hear about these cars and these guys and I drive in concord all the time and the only RX I have seen is the FB near my work.

Parting out my FC cause i just got an '85, and i cant afford to have two, had the FC for 8 years and its been fun, but now its new project time! Grade247 i still have the seats and bars, i can PM my number to anyone who wants it. Is that your car Grade on Dearborn Rd in Pembroke? I work in Chichester so i see it alot. Sorry guys, i keep my car in Troy most of the time, so your less likly to see it in Concord or Manch anymore.

How about we meet up sometime grade? Ya know, bring em' to redline to make our cars smile :P

hey
 

Yea that is my car on dearborn. It needs work I was actually planning on pulling the motor this weekend but it never went through lol. I am down with meeting a few of you guys need to fix the springs on my since the front right tire is rubbing :( cut srpings are lame lol. I would love to bring my car to redline but I am NA so you would kill me lol

to the one who tried getting ahold of me on AIM at about 11pm I am sorry I was not there lol I was in the process of taking a few shots of captain morgan lol but I did save you SN I am usually on after 11pm (i work 2nd shift). I am still looking to find a TII tranny and engine if anyone knows of a person or a place selling either or both. I am also going to be selling my NA 13b and tranny prob be out next weekend that is if no one wants to get together for the last ride of my NA fc....

Isn't your FC a good running car? Why are you parting it instead of selling it whole?

I think I have seen your car a few times. Do you head up by Wellington Hill quite a bit? If its the same car I have seen, beautiful! My FD is having some small issues. I am not sure if its going to be on the road before snow.

has anyone seen boriqua at all? If I get a 13bt I could deff use his help on porting and a rebuild since that guy is a guru lol and well he is local.